TB600G Laser Turbidity Meter

INQUIRY SHEET FOR TB600G LASER TURBIDITY MEASURING SYSTEMThank you for inquiring about our turbidity measuring system. Please fill in the following information or put a tick nextto the relevant item(s).1. General Information(1) Customer/Company name : _____________________________________________(2) Contact person : ___________________ Section: _________________ Phone: _______________(3) Plant name : _____________________________________________(4) Process to be measured : _____________________________________________(5) Measurement objective : □ Indication □ Recording □ Alarm □ Control(6) Power supply : _____________________ V AC, ___________________ Hz2. Measurement Conditions(1) Water sample temperature : Max. Min. Normal; [°C](2) Water sample pressure : Max. Min. Normal; [kPa](3) Flow rate : Max. Min. Normal; [l/min](4) Presence of slurry or contamination : □ No □ Yes(5) Water sample composition : _______________________________________________________(6) Others : _______________________________________________________3. Installation(1) Ambient temperature : _______________________________________________________(2) Location : □ Indoors _______________________________________________(3) Others : _______________________________________________________4. Specification Requirements(1) Measuring range : □ to mg/l(2) Transmission output : □ 4 to 20mA DC □ RS-232C(3) System component used : □ Laser turbidity meter □ Sampling system(4) Other informationAll Rights Reserved. Copyright © 1999, Yokogawa Electric CorporationSubject to change without notice.GS 12E7A1-ENov.01,2007-00