PFERD Tools for Use on Aluminium

<strong>PFERD</strong> <strong>Tools</strong> – Catalogues 201-209Catalogue 202 – Hole Saws and Hole CuttersHSS hole sawsHSS hole saws are excellent <strong>for</strong> producing accurate cut-outs fast. Their high-gradeHSS tooth set guarantees cost-efficient per<strong>for</strong>mance, particularly on thin-walledaluminium components in the SOFT and TOUGH machinability groups. A longservice life and burr-free edges are achieved with these tools.HSS hole saws sets<strong>PFERD</strong> offers five different sets of holesaws in the most common diametersused by craftsmen, plumbers, fittersand electricians (Germany andinternational).TC hole cuttersThanks to their high-grade tungsten carbide tips, these TC hole cutters provideoutstanding results and superior cost-efficiency on aluminium alloys in the SOFT,TOUGH and harD machinability groups. Two versions (flat, deep) facilitatemachining on diverse workpieces, including curved surfaces.8 mmTC hole cutters are supplied in two heights:■■8 mm (flat version) <strong>for</strong> use on sheet metal and flat material,available in various diameters from 16 to 105 mm.■■35 mm (deep version) <strong>for</strong> use on pipes and curved surfaces,available in various diameters from 16 to 60 mm.35 mmRecommendation <strong>for</strong> use■■To reduce cutting <strong>for</strong>ces, paraffin should be used when sawing aluminium.This will ensure a smoother operation of the tool while also extending its servicelife.NoteFor furtherin<strong>for</strong>mation, pleaserefer to our <strong>PFERD</strong>Tool Manual,Catalogue 202.Burrs20228