plastic tabletop chains - FB Kjeder

The 2500-series 2 1 ⁄2-inch pitch belt is intended for heavy-duty pasteurizing. The high working load permits applicationin heavily loaded glass pasteurisers. The total system, the module design, the transfer fingers, the sprockets and the pinretention system have been designed to cope with the harsh environment of glass pasteurizers. As a standard the beltsare made of yellow reinforced polypropylene; the transfer plates are made of the same material in green-blue.FEATURES2500-SERIES MODULAR BELTS• The surface of the belt is designed to handle broken glass without interference with the long term performance of thebelt. The special design optimizes water flow and prevents glass particles from getting stuck. Besides the solid ribs aredesigned to withstand the high forces that might be generated by broken glass.• The curved bottom of the slots between the ribs ensures an optimum contact with the finger transfer system,unaffected by the chordal action of the belt. This allows the fingers to push glass particles from the slot bottom to leavethe system. If damaged, the fingers can be replaced individually.• The fingers are grouped in a transfer block which allows them to slide and follow the expansion and contraction ofthe belt.• The Easy Lock pin retention allows easy installation and maintenance of the belt.PROGRAMME2500 Solid Rib The 20% open area combines optimum drainage with perfect support for the bottles.The ribbed design prevents broken glass to jam in the surface of the belt as with conventionalRaised Rib designsPositrackGuiding lugs beneath the belt for accurate tracking of the belt in pasteurizer tunnels over the fulllength, allowing optimum use of the belt surfaceFingerplatesTransfer system for easy loading of products from and onto the beltBOTTLE PASTEURIZER INFEED WITH 2500 BELTGLASS JARS PASTEURIZING ON 2500 BELT188