plastic tabletop chains - FB Kjeder

More documents

Recommendations

Info

ProductMaterial beltMATERIALSPLASTIC MODULAR CONVEYOR BELTSASAcetal with improved electrical conductive properties, reducing the build-up of static electricity. Colour: blackBHAPolypropylene with Microban antibacterial protection for high temperatureBHTPolypropylene for high temperature applications. FDA-approved. Colour: blueBLAPolyethylene with Microban antibacterial protection for low temperature applications; high impact resistance.FDA-approved. Colour: blueBSAAcetal with Microban antibacterial protection for high pressure and high speed, due to the hard surface;good abrasion resistance. FDA-approved. Colour: blueBSMAcetal with high resistance against wear and superficial damage. Colour: blackBYSMAcetal with high resistance against wear and superficial damage. Colour: black with yellow end modulesHPHigh Performance internally lubricated acetal (POM), for reduced wear up to 40% over plain acetal; intended fordry running or reduced lubrication and high-speed applications. Colour: greyHTPolypropylene for applications with high temperatures; good chemical resistance. Colour: beigeLFLow Friction acetal (POM) and special blend of lubricants for reduced wear up to 15% over plain acetal;intended for high-output applications at moderate to high speeds. Colour: light brownPSInternally lubricated acetal for high-speed applications, improving wear life. Colour: greyTCFTough Composite Friction material with high strength and excellent impact and chemical resistancefor high-speed case incline or decline conveyors. Colour: light greyUSPUltra Stabilized Polypropylene to increase reliability and prolong wear life in high temperature, chemicallyaggressivepasteurizer, warmer and cooler |applications.WHAPolypropylene with Microban antibacterial protection for high temperature applications. FDA-approved. Colour: whiteWHTPolypropylene for high temperature applications. FDA-approved. Colour: white Colour: greenWLAPolyethylene with Microban antibacterial protection for low temperature applications; high impact resistance.FDA-approved. Colour: whiteWLTPolyethylene for low temperature applications; high impact resistance. FDA-approved. Colour: whiteWSAAcetal with Microban antibacterial protection for high pressure and high speed, due to the hard surface;good abrasion resistance. FDA-approved. Colour whiteWXPolyamide composite for extended wear life up to five times compared to acetal materials; to be used in dryrunning glass handling applications where abrasive shards of glass can wear other materials rapidly; it can also beused in applications where the belt is subjected to sand and dirt. Colour: light greenDKAAramide reinforced acetal (POM) for wet or dry abrasive conditions, offering enhanced wear properties over plainacetals in combination with the low friction of a lubricated material. This material is available on request for aselected range of TableTop products.XLAInternally lubricated, extra low friction acetal for improved wearlife and high strength. Colour: anthraciteXLGInternally lubricated, extra low friction acetal for improved wearlife and high strength; FDA approved.Colour: green-blueXPWear resistant polypropylene with excellent long term heat stability – up to 104°C – and a very good chemicalresistance; FDA approved. Colour: light greenUSPUltra Stabilized Polypropylene with Superior long term heat stability – up to 104°C – and excellent chemical resistance;FDA approved, Colour dark greenYPRWear resistant reinforced polypropylene with excellent long term heat stability – up to 104°C – and a very goodchemical resistance. Colour: yellowDTS-C transferSuper tough reinforced polyamide, wear and abrasion resistant, extra high strength. Colour: blackFinger transfer 2500 Mounting block: MCC 1001; high grade mix of UHMWPE. Colour: black Fingers: Reinforced BPR-Polypropylene.Colour: green-blueProfile fingerplates Stainless steel AISI 304 (Werkstoff Nr. 1.4301)1000/2000Wearstrip MCC 3500 Special lubricated polyamide for superior PV-rating. Colour: grey-blackWearstrip MCC 3600 Polyester based plastic for direct food contact; FDA-approved. Colour: whiteBase chainTop PlatePLATE TOP CHAINSStandard: Carbon steelSS: Stainless steelLF acetal (POM) and special blend of lubricants for reduced wear up to 15% over plain acetal. Colour: light brownHP internally lubricated acetal (POM), for reduced wear up to 40% over plain acetal. Colour: greyWX Polyamide composite for extended wear life in abrasive circumstances up to five times compared to plainacetal. Colour: light greenWPC Polycarbonate offering resistance to product dropped onto the chain. Colour: white208
PartMaterialMATERIALSCURVESUpper part of Combi-A MCC 1200, ultra high molecular weight polyethylene, for optimum wear and abrasion resistance with aand CIP-curvesmolecular weight exceeding 9 million g/mol. Colour: aubergineUpper part of Combi-G MCC 2000, ultra high molecular weight polyethylene, with specially integrated ceramic additives, for superiorcurvesabrasion resistance with a molecular weight exceeding 9 million g/mol. Colour: green-yellowUpper part of Combi-S MCC 3500, special polyamide for optimum wear resistance in dry running lines where plastic chains run atcurveshigh speeds. Colour: sulphite greyUpper part of Combi-L MCC 3000, ultra high molecular weight polyethylene, for noise reduction and high PV limits withcurvesa molecular weight exceeding 9 million g/mol. Colour: light blueAll return partsMCC 1002, high grade mix of ultra high molecular weight polyethylene, for good wear and abrasionresistance with a molecular weight exceeding 3-7 million g/mol. Colour: blackCover plates Stainless steel AISI 430 (Werkstoff Nr. 1.4016)ScrewsStainless steelInserts (optional)BrassReturn guide shoe MCC 1200, ultra high molecular weight polyethylene, for good wear and abrasion resistance with a molecularweight exceeding 9 million g/mol. Colour: blackTubes in CIP-curves Stainless steel AISI 303 (Werkstoff Nr. 1.4305)Nozzles in CIP-curves Stainless steel AISI 303 (Werkstoff Nr. 1.4305)Tab curvesMCC 1003, ultra high molecular weight polyethylene, for good wear and abrasion resistance with a molecularweight exceeding 1 million g/mol- inserts (optional) BrassSprocketMaterialN/NS/SSW/SIWSuper tough reinforced polyamide, wear and abrasion resistantKU(S)/KXT/NSX(T)/NX(T)/SD/SS/SI PolyamideSTCarbon steelBolts Stainless steel AISI 304 (Werkstoff Nr. 1.4301)InsertsBrassKU/KUS/N/NX/NXTZNGGKUSRHubPolyamideZinc plated steelCast ironSPROCKETS AND IDLERS FOR TABLETOP CHAINSSPROCKETS AND IDLERS FOR MULTIFLEX CHAINSSPROCKETS FOR CASE CONVEYOR CHAINSPolyamideSuper tough reinforced polyamide, wear and abrasion resistantCarbon steel with black finish or stainless steelSPROCKETS FOR MODULAR BELTSSSW 500/1000Reinforced polyamide; extra high strength, wear and abrasion resistantNS 1500/5996/5700/7700/8500/7956N 1500SS 2500 RPACS 500/1000/505/1255Polyamide; super tough, wear and abrasion resistantKU 1500/3125/5936/7700/8500/7956KUS 1500/7700/3125SS 1005/505/1255Special plastic; super tough, wear and abrasion resistantSI 1005KU 1010PolyethyleneCS 2010KUS 6390N 5996/4700/5936CS/SS 2000KU 510POM Acetal; wear resistantKUS/KSXT 9200Bolts and nuts Stainless steel AISI 304 (Werkstoff Nr. 1.4301)InsertsBrass209
Page 1:
PRODUCT CATALOGUE REXNORD ® / MCC
Page 4:
The companyThe industries servedRex
Page 9 and 10:
STEEL TABLETOP CHAINSPROGRAMMESteel
Page 11 and 12:
STEEL TABLETOP CHAINSpage 55, 56,57
Page 13 and 14:
STEEL TABLETOP CHAINSpage 61page 20
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
STEEL TABLETOP CHAINS WITH RUBBER T
Page 23 and 24:
Page 25 and 26:
Page 28 and 29:
PLASTIC TABLETOP CHAINSpage 58, 59,
Page 30 and 31:
PLASTIC TABLETOP CHAINSpage 62, 63,
Page 32 and 33:
PLASTIC TABLETOP CHAINSpage 104page
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
PLASTIC SPECIAL CHAINSpage 73page 1
Page 42 and 43:
PLASTIC TABLETOP CHAINS WITH RUBBER
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
PLASTIC TABLETOP LBP CHAINSpage 60,
Page 50 and 51:
PLASTIC TABLETOP LBP CHAINSpage 122
Page 52 and 53:
CHAINBELTSpage 119page 72FLUSH GRID
Page 54 and 55:
CHAINBELTS20minpage 12183.84561.570
Page 56 and 57:
SPROCKETS FOR TABLETOP CHAINSSprock
Page 58 and 59:
Page 60 and 61:
Page 62:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
CORNER DISCS FOR TABLETOP CHAINSCor
Page 75 and 76:
MULTIFLEX AND CASE CONVEYOR CHAINSP
Page 77 and 78:
MULTIFLEX CHAINSpage 83page 2071757
Page 79 and 80:
MULTIFLEX CHAINSpage 82, 83page 207
Page 81 and 82:
MULTIFLEX CHAINSpage 82, 83page 207
Page 83 and 84:
SPROCKETS FOR MULTIFLEX CHAINSSproc
Page 85 and 86:
PLASTIC CASE CONVEYOR CHAINSpage 89
Page 87 and 88:
PLASTIC CASE CONVEYOR CHAINSpage 89
Page 89 and 90:
SPROCKETS FOR CASE CONVEYOR CHAINST
Page 91 and 92:
PROGRAMMEPLATE TOP AND GRIPPER CHAI
Page 93 and 94:
PLATE TOP CHAINSpage 208STRAIGHT RU
Page 95 and 96:
PLATE TOP CHAINSpage 123page 208SID
Page 97 and 98:
PLATE TOP GRIPPER CHAINSpage 123pag
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
CURVES AND STRAIGHT TRACKSMagnetfle
Page 105 and 106:
MAGNETFLEX CURVESpage 16, 24page 31
Page 107 and 108:
Page 109 and 110:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
MAGNETFLEX CURVESpage 49page 209MAG
Page 120 and 121:
MAGNETFLEX CURVESpage 53page 209MAG
Page 122 and 123:
TAB CURVESpage 38, 45,50, 51page 20
Page 124 and 125:
TAB CURVESpage 78, 80, 81page 209KT
Page 126 and 127:
BEVEL CURVESpage 33page 209KSU 200F
Page 128 and 129:
OVERVIEW REXNORD MATTOP MPitchinch
Page 130 and 131:
PLASTIC MODULAR BELTSWith a large v
Page 132 and 133:
The 500-series 1 ⁄2-inch pitch be
Page 134 and 135:
510-SERIES MODULAR BELTSThe 510-ser
Page 136 and 137:
The 1500-series 15 mm pitch belt he
Page 138 and 139:
1500-SERIESpage 141page 208FLUSH GR
Page 140 and 141:
1500-SERIESpage 141page 208FLUSH FL
Page 142 and 143:
The 8500-series 3 ⁄4-inch pitch b
Page 144 and 145:
8500-SERIESpage 145page 208PERFORAT
Page 146 and 147:
The 5930-series 3 ⁄4-inch pitch b
Page 148 and 149:
5930-SERIESpage 149page 208VACUUM T
Page 150 and 151:
The 1000-series 1-inch pitch belt c
Page 152 and 153:
1000-SERIESpage 156, 157page 208FLU
Page 154 and 155:
1000-SERIESpage 156, 157page 208RAI
Page 156 and 157:
1000-SERIESpage 156, 157page 208LBP
Page 158 and 159: The 1005-series 1-inch pitch heavy-
Page 160 and 161: 1005-SERIESpage 163Apage 208SUPERGR
Page 162 and 163: Page 163page 208LBP1005Assembly Bel
Page 164 and 165: The 1010-series 1-inch pitch belt i
Page 166 and 167: The 7700-series 1-inch pitch heavy-
Page 168 and 169: 7700-SERIESpage 169page 208PERFORAT
Page 170 and 171: The 6300-series 50 mm pitch hybrid
Page 172 and 173: 6390-SERIESpage 173page 208PERFORAT
Page 174 and 175: The 2000-series 2-inch pitch belt i
Page 176 and 177: 2000-SERIESpage 177, 178page 179RAI
Page 178 and 179: 2000-SERIESpage 176page 208CLICK-CO
Page 180 and 181: The 2010-series 2-inch pitch belts
Page 182 and 183: 2010-SERIESpage 183page 208TEXTURED
Page 184 and 185: 9200-SERIES FORTREX STAINLESS STEEL
Page 186 and 187: 9200-SERIESpage 185page 209CLASSICF
Page 188 and 189: The 2500-series 2 1 ⁄2-inch pitch
Page 190 and 191: The 6990-series 2 1 ⁄4-inch pitch
Page 192 and 193: 6990-SERIESSprocket type Code nr. N
Page 194 and 195: 3120-SERIES76.2 (3")page 195page 20
Page 196 and 197: The sideflexing belts range exists
Page 198 and 199: EF505-SERIESSprocket Code nr. Nr. B
Page 200 and 201: 1200-SERIESpage 203page 203page 208
Page 206 and 207: TABLE BELT WIDTHSBelt seriesStandar
Page 210 and 211: Chain page Belt page Sprocket page
show all

plastic tabletop chains - FB Kjeder

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?