Model 24926 - Ready Remote

More documents

Recommendations

Info

note! If the lights flash more than once and theengine does not start, refer to the No StartDiagnostics for the cause.important! Never remote start your vehicle when thekeys are in the ignition, except when activating QuickStop Mode, and never start the vehicle if it is not inPARK and the Parking brake is not set.important! It is unsafe to operate a vehicle's motorin a garage or other closed off area. Breathing theexhaust from the vehicle is hazardous to your health.Never activate the remote start in an enclosed space.When you are ready to drive the vehicle:➤➤Insert the ignition key and turn it to the ON (not theSTART) position.Press the brake pedal, the remote start will shut downand the engine will continue to runnote! If the brake pedal is pressed before the key isin the ON position, the engine will shut down.To shut down remote start:The remote start can be shut down in several ways for convenienceby the user or for safety by the shut down inputs.User remote start shut downs:➤ The transmitter button is pressed twice.➤Pulse the activation input wire twice© 2006 Directed Electronics53
➤The user steps on the brake as they begin to drive thevehicleSafety shut down inputs:While the vehicle is running during remote start operation, thesystem will monitor the vehicle and will automatically shut downthe engine if the system receives any of the following shutdowns➤➤➤➤➤The brake pedal is pressed.The hood is opened.The programmed run time has elapsed.Low battery voltageHigh or low tachometer signalQuick Stop ModeThe Quick Stop feature allows the vehicle to remain running afterthe key has been removed from the ignition. This feature is usefulfor occasions when you wish to exit and lock the vehicle for shortperiods of time, but would like to leave the motor running and theclimate controls on.To activate Quick Stop:➤With the ignition On and the engine running, do one ofthe following:■ Press and release on the transmitter buttontwice.■■Press and release the Momentary Switch 4 timesquicklyPulse the activation input wire twice54 © 2006 Directed Electronics
Page 1:
Model 24926➤Owner’s/Installatio
Page 4 and 5:
table of contentslimited lifetime c
Page 6 and 7: Install Guidewhat is includedContro
Page 9 and 10: TO THE VEHICLE. ALL DOORS LEADING F
Page 11 and 12: H1 Harness - 6 pin connectorH1/1H1/
Page 13 and 14: elay heavy gauge wires12345________
Page 15 and 16: Step 1, Heavy Gauge Wire Connection
Page 17 and 18: With the key in the off position, t
Page 19 and 20: Accessory and Starter wiresThe star
Page 21 and 22: Once you locate the starter wire, c
Page 23 and 24: Parking light flashThere are severa
Page 25 and 26: Using a sharp, pointed object poke
Page 27 and 28: Tachometer WireWARNING! In the foll
Page 29 and 30: Following is a brief description of
Page 31 and 32: Step 4, Mounting the Receiver/Anten
Page 33 and 34: Step 5, Immobilizer Bypass ModulesM
Page 35 and 36: You can learn more than one transmi
Page 37 and 38: Programming System SettingsMany of
Page 39 and 40: Exiting Feature programming:The fol
Page 41 and 42: 5. Wait-To-Start: This chooses the
Page 43 and 44: Remote Start DiagnosticsRemote Star
Page 45 and 46: Shut Down Diagnostics:The system ho
Page 47 and 48: Neutral Safety TestSome vehicles do
Page 49 and 50: Troubleshooting➜The ignition come
Page 51 and 52: 48 © 2006 Directed Electronics
Page 53 and 54: Owner’s GuideNow that the install
Page 55: OPERATING YOUR SYSTEMS FEATURESThe
Page 59 and 60: To de-activate Daily Start:➤ Pres
Page 61 and 62: Valet ModeValet Mode will defeat th
Page 63 and 64: ➤ Press and hold for 3 seconds th
Page 65 and 66: Notes______________________________
Page 67: The company behind this system is D
show all

Model 24926 - Ready Remote

Create successful ePaper yourself

Delete template?

Save as template?