3030 CANOBD2 Car Reader (E).qxd - Innova

More documents

Recommendations

Info

About the Car ReaderCONTROLS AND INDICATORSCONTROLS AND INDICATORS75416328Figure 1. Controls and IndicatorsSee Figure 1 for the locations of items 1 through 9, below.1. ERASE button - Erases Diagnostic Trouble Codes (DTCs) and "FreezeFrame" data from your vehicle's computer, and resets Monitor status.2. SCROLL button - Scrolls the LCD display to view DTCs when more thanone DTC is present.3. LINK button - Links the Car Reader with the vehicle's PCM to retrieveDTCs from the computer's memory, and to view I/M Readiness Monitorstatus.4. GREEN LED - Indicates that all engine systems are running normally (allMonitors on the vehicle are active and performing their diagnostic testing, andno DTCs are present).5. YELLOW LED - Indicates there is a possible problem. A “Pending” DTCis present and/or some of the vehicle's emission monitors have not run theirdiagnostic testing.4 OBD2
About the Car ReaderDISPLAY FUNCTIONS6. RED LED - Indicates there is a problem in one or more of the vehicle'ssystems. The red LED is also used to show that DTC(s) are present. DTCsare shown on the Car Reader’s LCD display. In this case, the MultifunctionIndicator (“Check Engine”) lamp on the vehicle's instrument panel will lightsteady on.7. LCD Display - Displays test results, Car Reader functions and Monitor statusinformation. See DISPLAY FUNCTIONS, below, for details.8. CABLE - Connects the Car Reader to the vehicle's Data Link Connector(DLC).DISPLAY FUNCTIONS10 5 4 6128973Figure 2. Display FunctionsSee Figure 2 for the locations of items 1 through 13, below.1. Vehicle icon - Indicates whether or not the Car Reader is being properlypowered through the vehicle's Data Link Connector (DLC). A visible iconindicates that the Car Reader is being powered through the vehicle's DLCconnector.2. Link icon - Indicates whether or not the Car Reader is communicating(linked) with the vehicle's on-board computer. When visible, the Car Readeris communicating with the computer. If the Link icon is not visible, the CarReader is not communicating with the computer.3. DTC Display Area - Displays the Diagnostic Trouble Code (DTC) number.Each fault is assigned a code number that is specific to that fault.4. Pending icon - Indicates the currently displayed DTC is a "Pending" code.5. CODE icon - Identifies the Code Number Sequence display area.6. MIL icon - Indicates the status of the Malfunction Indicator Lamp (MIL). TheMIL icon is visible only when a DTC has commanded the MIL on the vehicle'sdashboard to light.7. FREEZE FRAME icon - Indicates that “Freeze Frame” data has been storedin the vehicle’s computer for the currently displayed DTC.OBD2 5
Page 3 and 4: Easy To Use . . . .■■■Connect
Page 8 and 9: About the Car ReaderDISPLAY FUNCTIO
Page 10 and 11: Using the Car ReaderCODE RETRIEVAL
Page 12 and 13: Using the Car ReaderERASING DIAGNOS
Page 14 and 15: DTC DefinitionsDIAGNOSTIC TROUBLE C
Page 16 and 17: DTC DefinitionsP0010 - P0075CodeDef
Page 19 and 20: P0172 - P0213DTC DefinitionsCodeDef
Page 30 and 31: DTC DefinitionsP0759 - P0801CodeP07
Page 32: www.innova.com®Innova Electronics

3030 CANOBD2 Car Reader (E).qxd - Innova

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?