VENTURA 150 DELUXE INSTALLATION MANUAL

Ventura 150 Wiring DiagramRoute a heavy pair of wires from the main DC electrical panel to the Feed Pump location.Splice with butt connectors or a terminal block. Seal connectors. A switch located near the feedpump will facilitate maintenance. Voltage drop will impair performance of the system. Wirelength is the sum of the Positive and Negative wires.Wire Size Guide for Ventura 150 12VProtect with 15 Amp Fuse or Circuit Breaker# 10 Gauge (6mm) to 15 feet (4.5M)# 8 Gauge (10 mm) to 25 feet (7.5M)#6 Gauge (16mm) to 35 feet (10.6M)Wire Size Guide for the Ventura 150 24VProtect with 7 Amp Fuse or Circuit Breaker#12 Gauge(4mm) to 10 feet (3M)#10 Gauge (6mm) to 25 feet (7.6M)#8 Gauge (10mm) to 35 feet (10.6M)Feed Pump wiring, Red is PositiveBlack is Ground.Main DC Electrical PanelCooling Fan Connects in parallel with the Feedpump. Same color code.DC negative buss barTo Battery12