ODMS (Error Messages) - ABB SolutionsBank

ERROR MESSAGES AND RECOVERY®Table 7-2. ODMS Error Messages (continued)MessageNC communication error.No routine defined to handle the current GMImessage.No routine defined to pars the current GMI message.Number of records returned from function TAG-SPAGE was < zero.Open msg error.Output to INFI 90 OPEN was bypassed becauseblock was red tagged.PIMSBase record not defined.PIMSBase record read errorPIMSBase record does not exist.Requested ICI does not exist.STOPTASK message received during initialization.Summary definition record does not exist.Summary definition record not defined.Summary line record read error.Summary record read error.Summary record write error.System service error. Service name and statusembedded in message text.Tag create error.Tag DefList record read error.Tag DHis xx selector read failed.Tag DHisxx selector write error.Tag fixed area read error.Tag fixed area write error.Tag ICI data read error.Tag ICI data write error.Tag IS data read error.Tag list memory alloc error.Corrective ActionCall Elsag Bailey technical support for assistance.Check the operating system configuration. Call ElsagBailey technical support for assistance if required.Outputs to red tag variable are not allowed. Reset redtag field.Verify that SETCIM is running. Verify that open datamanagement server records are available in the database.Insure that the ICI number is correct. Enter a correctedICI number if necessary.Normal message if a shutdown request is made shortlyafter start-up. Call Elsag Bailey technical support forassistance.Verify that SETCIM is running. Verify that open datamanagement server records are available in the database.Check the operating system error code, then call ElsagBailey technical support for assistance.Verify that SETCIM is running. Verify that open datamanagement server records are available in the database.Check the operating system configuration. Call ElsagBailey technical support for assistance if required.ERROR MESSAGES7 - 22 WBPEEUI350003B0