ODMS (Error Messages) - ABB SolutionsBank

ERROR MESSAGES AND RECOVERYData out of rangeDECNET interface not available on this hostDefault read error; message tags missingDetail not allowedErr inserting History in EX RA of RecErr obtaining History Seq # from RecErr obtaining Spec History Seq #Err reading #Entries/Page (TAGLISTSCR)Err reading #Selected Tags (TAGLISTSCR)Err reading Default Rec < 0 from RecErr reading Default Rec fieldErr reading Desc, Plant Area, or Tag TypeErr reading Enable Global from PIMSBaseErr reading Ex History Seq # from RecErr reading Ex Repeat Area from RecErr reading F1 value format record IDTable 7-1. ODMS System and Error Messages (continued)MessageThe value entered is outside of the allowable range. Entera value within the allowable range of the field or attribute.The DECNET interface option is available only on VAX/VMS protocol machines. HP-UX machines will not supportthis communication protocol.Call Elsag Bailey technical support for assistance.No corrective action required. The open data managementserver does not provide additional information forthe highlighted item.Verify that the disk history program is active for the givenrecord. Call Elsag Bailey technical support for assistance.Call Elsag Bailey technical support for assistance.Verify that the disk history program is active for the givenrecord. Call Elsag Bailey technical support for assistance.Verify that a valid value format has been defined. CallElsag Bailey technical support for assistance.Err reading F2 value format record IDErr reading F3 value format record IDErr reading F4 value format record IDErr reading fixed tag data from Record Call Elsag Bailey technical support for assistance.Err reading Global Message Switch (PIMSBase)Err reading Global Message SwitchErr reading HISSUMSCR recordErr reading History Data Scratch RecordErr reading Log Control Record IDVerify that a valid log control record has been defined.Call Elsag Bailey technical support for assistance.Err reading Log Control Record ID (PIMSBase)Err reading Message Output Scratch recErr reading New Message from MSG ID recErr reading P1 value format record IDErr reading P2 value format record IDErr reading Plant Area from MSG ID recErr reading Scratch recordErr reading sEnable Global from MSG IDErr reading sMessages to Log from MSG IDErr reading sMessages to Log from RecCorrective ActionCall Elsag Bailey technical support for assistance.Verify that the logic state descriptor is available. CallElsag Bailey technical support for assistance.Call Elsag Bailey technical support for assistance.SYSTEM MESSAGESWBPEEUI350003B0 7 - 3