Specification for GE Magne-Blast Type AM Circuit Breakers
Specification for GE Magne-Blast Type AM Circuit Breakers
Specification for GE Magne-Blast Type AM Circuit Breakers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Specification</strong> <strong>for</strong><strong>GE</strong> <strong>Magne</strong>-<strong>Blast</strong> <strong>Type</strong> <strong>AM</strong><strong>Circuit</strong> <strong>Breakers</strong>Powell Apparatus Service8550 Mosley Dr.Houston, TX 77075(713) 944-6900 - p(713) 948-4569 - fTESTINGSeller shall per<strong>for</strong>m all design production and con<strong>for</strong>mance tests on the new circuit breakerassemblies required in ANSI C37.09 and C37.59, Section 5. Racking tests per ANSI C37.20.2,if required to verify mechanical interfaces with the existing switchgear assembly <strong>for</strong> testpurposes.Test data from previous similar designs may be used <strong>for</strong> current design verification whenprovided in accordance with ANSI C37.59, Section 5.Certified test results may be submitted <strong>for</strong> acceptance in lieu of per<strong>for</strong>mance tests if vendor haspreviously completed design test on a breaker submitted <strong>for</strong> evaluation in accordance with thisspecifications requirements.SHIPPINGThe interior of all equipment shall be free of all <strong>for</strong>eign materials such as welding rod waste,mill scale, oil, grease or other deleterious material.In general all equipment and material shall be suitably crated boxed, or otherwise prepared<strong>for</strong> shipment to prevent damage during handling, shipping, and storage. ALL openings shall beproperly protected to prevent the entrance of dirt or debris. It shall be the responsibility ofSeller to take any precautions required to reasonably ensure jobsite arrival of the equipment inan undamaged and satisfactory working condition.QUALITY ASSURANCESeller shall have a QA Program in effect at all times to verify that all items and services,including subcontracted items and services, comply with the requirements of the purchaseorder and its attachments.DEVIATIONS AND NON-CONFORMANCESAny departure from any requirement of this specification is considered a deviation ornoncon<strong>for</strong>mance. Examples include, physical defects in equipment, test failures, equipmentout-of-tolerance, or deviations from specification, inspection, or test procedures. No deviationor noncon<strong>for</strong>mance shall be accepted until approved in writing by Purchaser.©2004 Powell Apparatus Service • All rights reserved.
Change language