universiti teknologi malaysia - Faculty of Electrical Engineering - UTM

385.3.2 Output TestingThis test is to identify error produced when the system tries to fetch the datafrom the database. The system was given a function to fetch the desired data andwas tested whether it will produce the desired output or error messages if it failedto works properly.In this testing the most difficult and challenging part is to fix the header ofthe uploaded file to enable the view from online function. The header of HTMLcommand clash with the include header file resulting the include header to beabandon in the view form online function.In the downloading function the same problem occurred as the system failsto fetch file size and file name resulting blank file with PHP type were downloaded.Other output problem is mainly because of misused of command Queryin MySQLprogramming. This error then was fixed till it produced the output desired.5.3.3 System flow testingSystem testing in term of flow had been made. This is important to identifythat the system flows is correct and stable. In this phase, function and link locationwere tested as they were placed in the right module and been verify so that it willnot create problem to the user in the future. The developed system flexibility werealso been studied so that the system developed can be considered user‐friendly anddynamic to the end user. During the system development, testing is frequentlydone. After testing and upgrading were implemented, the system seems to operatemore dynamic and user friendly.