Concrete 2 - Testing Equipment for Construction Materials
Concrete 2 - Testing Equipment for Construction Materials
Concrete 2 - Testing Equipment for Construction Materials
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
���������<br />
Subject to technical modification without notice. TESTING<br />
<strong>Concrete</strong> 2<br />
���<br />
��� ��� �����������<br />
Order no. ������������������<br />
2.0244<br />
���������������� 1-100daN�<br />
�����������<br />
������� 650�325�160�65�32 ����<br />
����� 16mm<br />
<strong>Concrete</strong> mortar penetrometer<br />
For determination of the setting time of the mortar<br />
fraction in concrete mixes with stump greater<br />
than zero, by testing mortar sieved from mix.<br />
The apparatus works with spring loading and<br />
is graduated from 1 to 100 daN.<br />
A sliding ring indicates the load reached. Complete<br />
with a set of neddle points of 650, 325,<br />
160, 65, 32 und 16 mm2 area.<br />
Supplied complete with case.<br />
ASTM C403, AASHTO p. 197, UNI 7123<br />
2 �<br />
�������� ASTM C403�AASHTO ��<br />
T.197�UNI �� 7123<br />
���<br />
���<br />
2.0240<br />
���<br />
2.0243<br />
2.0209<br />
K �������<br />
���������������������<br />
����������<br />
K-Slump tester<br />
The device is used to determine the workability<br />
and degree of compaction of fresh concrete after<br />
being placed in <strong>for</strong>ms. It can be used <strong>for</strong> in-situ<br />
measurements or inside test moulds and <strong>for</strong>ms.<br />
��������������<br />
��������������������<br />
������������������<br />
230 V / 50 Hz<br />
���� EN 413�NF P 18-452<br />
<strong>Concrete</strong> workability meter<br />
By vibration the concrete flows from the large<br />
chamber into the small one. The time is a function<br />
of the workability of the fresh concrete.<br />
230 V / 50 Hz<br />
EN 413, NF P 18-452<br />
����������<br />
�����������������32 mm 2<br />
�������� ASTM C 403<br />
Pocket concrete penetrometer<br />
For the evaluation of the initial set of concrete<br />
mortar.<br />
Plunger surface: 32 mm 2<br />
ASTM C403<br />
TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de<br />
2.11