Concrete 2 - Testing Equipment for Construction Materials

���������
Subject to technical modification without notice. TESTING
���
Order no.
2.1092
2.1085.01
2.1085.02
2.1085.03
2.1085.06
2.1085.07
2.1085.08
2.1085.09
2.1085.10
2.1085.11
2.1085.12
2.1085.13
2.1086.03
2.1087.01
2.1087.02
2.1087.03
Concrete 2
���
Compression and bending testing machines,
heavy duty design
Compression testing machine 3000 kN and
separate bending testing machine 100 kN
DIN 51220, 51223, 51227; class 2/ ISO 4012; class 1
With common control panel on console of the
compression testing machine, electronic pressure
measurement, manual control, digital display,
peak value memory, electronic load pacer.
Compression range: 200 - 3000 kN
Bending range: 6 - 100 kN
Platens: 300 mm diam.
Test chamber size of
compression tester: 320 mm
Piston stroke of
compression tester: 50 mm
Test chamber size of
bending tester: 220 mm
Piston stroke of
bending tester: 220 mm
400 V / 50 Hz
For reduction of the test chamber size:
Distance piece 210 x 210 x 110 mm
Distance piece 170 x 170 x 50 mm
Distance piece 120 x 120 x 50 mm
Accessories
Quick-release valve
Platens 320 x 520 mm
(Instead of 300 mm diam.)
Chrome-plated columns
Protective grid for machine with platens:
300 mm diam.
320 x 520 mm
Electrical piston stroke limiter
Extension of piston stroke to 100 mm
Prefilling pump for faster piston stroke
Tape printer, model EP-5030 (date, specimen No.,
type of specimen, breaking load in kN and strength
in N/mm 2 )
Blade holder for two upper blades for
three-point loading as per DIN 1048
Pressure piston for curb testing
Platen insert in bending chamber, 230 mm diam.,
top platen with pendulum axle
TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de
2.77