inoLab Cond 730 - Fagerberg

More documents

Recommendations

Info

Operation Cond 7304.5.2 Switching on AutoStore (Int 1)The storage interval (Int 1) determines the time intervalbetween automatic storage processes.After the time interval expires, the current data record istransmitted to the data storage and to the printer/interface.The storage interval (Int 1) is set to OFF in the factory.Thus, the AutoStore function is switched off.To switch the function on, set up a time interval (5 s, 10 s,30 s, 1 min, 5 min, 10 min, 15 min, 30 min, 60 min).NoteIf the AutoStore function is active, the setting of the datatransmission interval (int 2) is ineffective (see page 47).Setting the storageinterval1 Press and hold down the g key.2 Press the s key. Int 1 appears on the display.3 Press the 82 keys to set up the required timeinterval between storage processes.4 Confirm with g.The number of free memory locations appears on thedisplay.38
Cond 730Operation5 As soon as all 800 memory locations are full, theAutoStore function is terminated (Int 1 = OFF).If too few storage locations are available for yourmeasurements:– backup the data storage (see page 40) and– clear the data storage (see page 46).6 Confirm with g.The prompt for the I.D. number appears on thedisplay.7 Press 82 to set the required I.D. number.8 Confirm with g.The instrument changes to the measuring mode andstarts the measuring and storage procedure.AutoStore flashes on the display.39
Page 1 and 2: Operating manualba75445einoLabCond
Page 3 and 4: Cond 730Contents1 Overview . . . .
Page 5 and 6: Cond 730Overview1 OverviewThe compa
Page 7 and 8: Cond 730Overview1.2 DisplayStatus l
Page 9 and 10: Cond 730Safety2 SafetyThis operatin
Page 11 and 12: Cond 730SafetySafe operationIf safe
Page 13 and 14: Cond 730Commissioning3 Commissionin
Page 15 and 16: Cond 730Commissioning2 Connect the
Page 17 and 18: Cond 730Operation4 Operation4.1 Swi
Page 19 and 20: Cond 730OperationPreparatoryactivit
Page 21 and 22: Cond 730Operation4.2.1 Conductivity
Page 23 and 24: Cond 730Operation4.2.3 TDS (total d
Page 25 and 26: Cond 730OperationWhy determine/setu
Page 27 and 28: Cond 730OperationNoteThis method of
Page 29 and 30: Cond 730Operation4.3.2 Setting the
Page 31 and 32: Cond 730OperationRange1 Press the c
Page 33 and 34: Cond 730OperationSelecting the nonl
Page 35 and 36: Cond 730OperationSwitching off thet
Page 37: Cond 730Operation2 Confirm with g.T
Page 41 and 42: Cond 730Operation3 After 2 s the re
Page 43 and 44: Cond 730OperationOutputting to thei
Page 45 and 46: Cond 730Operation Contents of the m
Page 47 and 48: Cond 730Operation4.6 Data transmiss
Page 49 and 50: Cond 730Operation4.6.2 Recorder (an
Page 51 and 52: Cond 730Operation4.6.4 Operation wi
Page 53 and 54: Cond 730OperationBaud rateData tran
Page 55 and 56: Cond 730OperationTemperature unit16
Page 57 and 58: Cond 730Operation4.8 ResetYou can r
Page 59 and 60: Cond 730Maintenance, cleaning, disp
Page 61 and 62: Cond 730Maintenance, cleaning, disp
Page 63 and 64: Cond 730What to do if...6 What to d
Page 65 and 66: Cond 730What to do if...Integrated
Page 67 and 68: Cond 730Technical data7 Technical d
Page 69 and 70: Cond 730Technical dataCell constant
Page 72 and 73: Technical data Cond 730FCC Class A
Page 74 and 75: Lists Cond 730AbbreviationsABSARARn
Page 76 and 77: Lists Cond 730GlossaryAutoReadMonit
Page 78 and 79: Lists Cond 73078
Page 80: Lists Cond 730Rrecorder output . .

inoLab Cond 730 - Fagerberg

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?