SLIDES

2.3 Printed Circuit BoardAssembly with NDN 1In this application, NDN 1 micro frictionless tables are utilized for placing electronic componentssuch as resistors, capacitors, coils and integrated circuits on printed circuit boards.With a gripper installed on the top of the SCHNEEBERGER NDN 1 micro frictionless table,the components are picked from a large hopper. The parts are then placed on a specificposition on the printed circuit board with a Z-stroke of the table. In this case, the NDN 1table is driven by a synchronous toothed belt. The SCHNEEBERGER NDN 1 distinguishesitself particularly by its constant precision under the extra demands on service life andaccuracy imposed by the high dynamic loading found in this application.Product NDN 1Stroke20 mmNominal stroke15 mmOperating orientationverticalPosition accuracy0.03 mmAcceleration up to 15 m/s 2Straightness and Flatness of travel 0.003 mm• 8