Manual Unheated - Applications for 1K High Viscosity Products

EXTRUSION UNIT 32.207TWIN POST RAM(200 LITRES DRUMS)The 32.207 pump is specially designed for pumping viscous materials. KREMLINREXSON equipment can process a wide range of materials including oils,greases, adhesives and sealants.This equipment has proved itself over the years to be strong and reliable andcan process products up to 300.000 centipoises depending on specifi cation.The system pumps directly from the original material container and is used on200 liter pails (interior diameter 571 mm).The modular conception allows you to select an extrusion system comprisingof a pump, elevator, follower plate, gun and hoses + optional extras includingfi lter, regulator to suit your application.Equipment compliant with ATEX Directive.FEATURESModular designAir motor design enables precise controlDirect pumping from 200 lts drumShovel pump technologyChoice of double seal on follower platePneumatic driven pumpBENEFITSWide range of options available to suitmost applicationsThe unique air motor designensures a constant controllled fl ow ratewith low noise and minimum icing riskClean wipe of the material drum savingmaterialsCan be used with a wide range ofmaterialsRecommended for high viscosity andmoisture-sensitive materialsSafe for use with solvents and otherfl ammable materials141 (4.0)124 (3.5)106 (3.0)88.3 (2.5)70.6 (2.0)52.9 (1.5)35.3 (1.0)17.6 (0.5)Motor air consumption(m 3 /min.) (Cubic feet/min).6 bar - 87 psi4 bar - 58 psi2 bar - 29 psi0 10 20 30 40 50 60Pump cycles per minuteSPECIFICATIONSPressure ratio 32/1Motor type 5000Fluid volume per cycle (cc) 207Free flow rate at 60 cycles (L/mn) 12,4Fluid Output at 15 Cycles (l/mn) 3,1Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 66Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 192Maximum Fluid Temperature (°C) 60Seal packingsPTFE + PEWetted partsCarbon steelWeight (kg) - bare pump 31,5FITTINGSFitting Air Inlet F 3/4'' G (1)(1) Recommended air supply hose diameter 1/2"Fluid Inlet Ø 80Fluid OutletF 3/4'' G34GUIDE KREMLIN FR GB DER OK.indd 34 17/05/11 09:51