Avalanche Remote Control User Guide - Wavelink

Chapter 5: Configuring Client Settings 31PolicySelect how Remote Control notifies the mobile device userthat Remote Control is establishing a connection.Silent indicates that the user will not be notified.Notify indicates that the user will see a text window on hisdevice letting him know that a connection has beenestablished.Prompt‐Allow will provide the user with a prompt to allowor deny the connection. If the user does not respond, theconnection will be allowed.Prompt‐Deny will provide the user with a prompt to allowor deny the connection. If the user does not respond, theconnection will be denied.Policy secondsSleep While ConnectedPre-Connect to ServerConnect on ActiveSyncAllow ClientConfigurationSelect how long the notification or prompt will be displayed.If you selected Prompt‐Allow or Prompt‐Deny, this is howlong Remote Control will wait before establishing ordenying the connection.Enable this option to allow the mobile device to enter sleepmode while connected to Remote Control. If you do notenable this option, Remote Control will not allow the mobiledevice to enter sleep mode while connected.Enable this option to configure the device to always preconnectto the Remote Control Server.Enable this option to configure the device to connect to theRemote Control Server when connected through ActiveSync.Enable this option to grant client configuration control to themobile device user. This allows the user to configure theRemote Control client from the mobile device. When themobile device user has configuration control, any changesyou make in the Client Settings tab from the RemoteControl Console will not deploy to the device. To regainClient Configuration setting control from the RemoteControl Console, you must disable this option and redeploythe settings to the mobile device.