Avalanche Remote Control User Guide - Wavelink

Chapter 7: Connecting to Mobile Devices 47Chapter 7:Connecting to Mobile DevicesAfter you configure connection profiles, client settings and server settings in theRemote Control Console, you can deploy the client portion of Remote Control to themobile device. Once the mobile device has the client installed, you can create RemoteControl connection sessions. A connection session is when the mobile device isconnected to Remote Control, allowing you to view and control the mobile device.When you have initiated a connection session, the device appears in the RemoteControl Viewer. If you launch the viewer from the Avalanche Web Console, theconnection session will appear in the Web Viewer. If you launch from the AvalancheJava Console or the Remote Control Console, the connection session will appear in theStandard Viewer.NOTE Device skins are not supported in the Web Viewer.This section provides information about the following Remote Control connectiontasks:• Deploying the Remote Control Client to the Mobile Device• Connecting to a Mobile Device• Closing Remote Control Sessions• Sending SMS Messages to Mobile DevicesNOTE If you have not licensed Remote Control, you will not be able to connect to themobile device.Deploying the Remote Control Client to the Mobile DeviceUsing Avalanche, you can deploy the client portion of Remote Control to mobiledevices that are currently in range and running the Avalanche Enabler. You canperform universal updates or individual device updates.For specific instructions about deploying software packages from the AvalancheConsole, refer to your Wavelink Avalanche User Guide.