SITRANS F flowmeters - Industria de Siemens

More documents

Recommendations

Info

SITRANS F flowmetersSITRANS F RRotary-piston meters – Ordering data – DN 25 (1"),acid-resistant, rated fl. rate 100 l/min (26.5 USgpm)© Siemens AG 20094Selection and Ordering dataOrder No.Rotary-piston meter DN 25 (1“), acid-resistantNom. press. MaterialsMax. permissible Weight approx.Measuringliquid temperature kg (lb)Housing chamber 1) Rotary pistonPN 10 (145 psi) Cast iron Duroplast Carbon 80 °C (176 °F) 28 (61.7) 7M R 1 1 1 1 - 7 P K 7 7 - 7777 - ZPCTFE 40 °C (104 °F) 7M R 1 1 1 1 - 7 P H 7 7 7 7 7 7 - ZFlow directionMechanism shaft vertical From left to right 1From right to left 2From front to back 3From back to front 4RegisterWeight approx. kgSingle pointer dial(lb)• Type 01 0.8 (1.76) 0 1Double pointer dial (note mounting position! Description on page 4/397)• Type 11 1.5 (3.3) 1 1• Type 12 2.5 (5.5) 1 2Quantity preset register(only for vertical mechanism shaft, flow direction according to codes 1 ... 4)Value per revolution1 l (0.26 USg) 110 l (2.65 USg) 2)2Pastest pointer or fastest drumAccessories (pulsers, cooling attachments)For measuring temperatures over 80 °C, it is always necessary to order one cooling attachment (7MV3001-1XX00).For measuring temperatures over 180 °C, it is always necessary to order two cooling attachments (7MV3001-1XX00)as separate items.• NoneA• MountedB• Pulser already mounted above the intermediate gear:- 10 pulses/value per revolution C- 100 pulses/value per revolution D• Pulser already mounted below the intermediate gear:- 10 pulses/measuring chamber volume G- 100 pulses/measuring chamber volume HTestsWorks testAWorks test certificateBGasketViton 3)1Kalrez 21) In order to avoid the measurement chamber components becoming misshapen, the pressure loss should not exceed 0.5 bar (7.25 psi).2) Not possible with rotary-piston meters with quantity preset register!3) Consider durability of Viton!AccessoriesInstruction Manual7MR1111...•German•EnglishOrder No.F) C73000-B5100-C23F) C73000-B5176-C23F) Subject to export regulations AL: 9I999, ECCN: N.■ Informations relevant for orderingThe informations relevant for ordering can be found in section„Introduction“ at the beginning of the chapter:Application: see page 4/351Function and design: see page 4/352Configuration: see page 4/354 ff.Operating limits: Permissible liquid temperatures and furthertechnical specifications see page 4/362 ff.Dimensional drawings: see page 4/379 (dimensions offlanges) and pages 4/379 ff.Mounting position: as desired; note mounting position of register!Certificates and approvalsClassification according to pressure equipment directive(DGRL 97/23/EG):Fliquids of fluid group1; complies with requirements of article 3,paragraph 3 (sound engeneering practice SEP)Ordering example see page 4/3654/374 Siemens FI 01 · 2009March 2009
© Siemens AG 2009SITRANS F flowmetersSITRANS F RRotary-piston meters - Ordering dataAutomatic batchmeter DN 25 (1")Selection and Ordering data Order No. Order codeAutomatic batchmeter DN 25 (1“)With mechanical shut-off valve downstream of metering mechanism (upstream of metering mechanism seepage 4/378)Nom. press. Materials Weight appr.Housing Meas. chamber Rotary pistonkg (lb)PN 10 (145 psi) Cast iron Cast iron • • • • • 38 (83.8) 7M R 1 1 1 7 - 7 E 777 - 7777 7 7 7CrNiMo steel • • • • • • 7M R 1 1 1 7 - 7 D 7 7 7 7 7 7 7 7 7 7CrNiMo steel CrNiMo steel • • • • • • 7M R 1 1 1 7 - 7 S 7 7 7 7 7 7 7 7 7 7↓ ↓ ↓ ↓ ↓ ↓ ↓Rotary piston materialMax. permissible Weight appr.liquid temperature kg (lb)Carbon • 0.15 (0.3) KCast iron • 0.55 (1.2) ECast iron, grooved • 0.5 (1.1) BNi-resist • 0.55 (1.2) NNi-resist, grooved • 0.5 (1.1) CHard rubber • 40 °C (104 °F) 0.1 (0.2) GHard rubber, grooved • 40 °C (104 °F) DPTFE with graphite filling • 40 °C (104 °F) 0.3 (0.7) FPTFE with graphite filling, grooved • 40 °C (104 °F) LPTFE with graphite filling • 90 °C (194 °F) RPTFE with graphite filling, grooved • 90 °C (194 °F) MPCTFE • 40 °C (104 °F) 0.16 (0.4) HPCTFE, grooved • 40 °C (104 °F) JCrNiMo with carbon contact surface • 0.4 (0.9) SCrNiMo with PTFE contact surface • TTappet bushing• With maintenance-free sealed bushing 2• With bellows 1)3Flow directionMechanism shaft always vertical • From left to right, valve right 1• From right to left, valve left 2Quantity preset register(description on page 4/397) • Type 30 3 0• Type 30, ex-protected switch 5 4Value per revolution and adjustment step1 l/0,1 : 0,1 l 110 l/1 : 1 l 2Accessories (description on page 4/402)WithoutAMounted (separate Order No. required, see Selection and Ordering data table on page 4/377)BTestsWorks testAWorks test certificateBPreliminary official test up to 50 l/min (13.2 USgpm) C 2)FlangesPlane, drilled to EN 1092-1 0Plane, drilled to specification 9 R 1 YWith sealing ridge to specification 9 R 2 YThe data of the liquid are always required: Temperature of the liquid, density, min. and max. flow rate, viscosityPlease always specify in plain text or with Order code according to Selection and Ordering data table on page 4/378.Note: If pressure impacts are likely, the valve should be before the automatic batchmeter in the direction of flow.(See supplement A04, page 4/378)41) Restricted operating conditions (max. 40 °C (104 °F), max. 3 bar (43.5 psi))2)Not with PTFE and PCTFE pistons.AccessoriesInstruction Manual7MR111...•German•EnglishOrder No.F) C73000-B5100-C20F) C73000-B5176-C20■ Informations relevant for orderingsee page 4/377F) Subject to export regulations AL: 9I999, ECCN: N.March 2009Siemens FI 01 · 20094/375
Page 1 and 2:
SITRANS Fflowmeters© Siemens AG 20
Page 3 and 4:
© Siemens AG 2009SITRANS F flowmet
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
■ OverviewSITRANS F M productsSIT
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
1. Transmitter testThe transmitter
Page 21 and 22:
Page 23 and 24:
Imperial© Siemens AG 2009SITRANS F
Page 25 and 26:
-© Siemens AG 2009Measuring abrasi
Page 27 and 28:
Sensor cables and conductivity of m
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
MAG 8000 water meter uncertaintyTo
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
MAG 8000 has built in Hastelloy gro
Page 109 and 110:
Remote version© Siemens AG 2009SIT
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
2050© Siemens AG 2009SITRANS F flo
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
© Siemens AG 2009the liquid’s de
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324: ■ Characteristic curvesThe orific
Page 325 and 326: © Siemens AG 2009SITRANS F flowmet
Page 327 and 328: s© Siemens AG 2009Questionnaire fo
Page 355 and 356: Certain values per revolution or ce
Page 361 and 362: Note: The measuring system of the r
Page 363 and 364: Piston materialsSITRANS F flowmeter
Page 373: © Siemens AG 2009SITRANS F flowmet
Page 379 and 380: SITRANS F flowmetersSITRANS F RRota
Page 381 and 382: Rotary-piston meter DN 15 (½") wit
Page 383 and 384: © Siemens AG 2009For rated pressur
Page 385 and 386: Rotary-piston meter DN 50 (2“)Rot
Page 387 and 388: Rotary-piston meter DN 50 (2") with
Page 389 and 390: © Siemens AG 2009For rated pressur
Page 391 and 392: Acid resistant rotary-piston meter
Page 393 and 394: Automatic batchmeter DN 25 (1“)©
Page 403 and 404: ■ Overview© Siemens AG 2009SITRA
show all

SITRANS F flowmeters - Industria de Siemens

Create successful ePaper yourself

Delete template?

Save as template?