OP03 â Implementing PanelView Plus & VersaView CE with ...

More documents

Recommendations

Info

a) Click ‘Add’ toadd a newshortcut. Thentype the shortcutname as‘RecipeShortcut’and press Enter3. Configure the Local CommunicationsFollow steps a) to g) to configure the Local communications.a) Ensure thatthe Local tab isselectedc) Expand the Ethernet driver andscroll to and select the SoftLogix 5800module with the IP address and nodeas specified by the lab instructor.b) Select the‘RecipeShortcut’ byclicking on it.f) Click ‘Apply’then ‘OK’ tofinish.OP03 — RecipePlus8 of 52 RSTechED 2005 • Rockwell Software
Configuring the RSView ME ApplicationBefore the application screens are created, some basic system configuration needs to beperformed.Configure the Projects Settings by following steps a) to d)a) In the Explorerwindow, double-clickon the ‘ProjectSettings’ to openb) Ensure thatthe ‘General’tab is selected.c) Click on the downwardarrow to expand the selectionbox of ‘Project window size’and select 1024x768.d) Click ‘OK’ and‘Graphic DisplayScaling’ windowwill openNote: ‘Optional Section’ ofthis lab contains a summarytable with the Project WindowSizes and the correspondingTerminal Types.OP03 — RecipePlusRSTechED 2005 • Rockwell Software 9 of 52
Page 3 and 4: OP03 — RecipePlusContentsBefore y
Page 5 and 6: Starting RSView Studio and Creating
Page 7 and 8: ) Type in‘RecipePlus’ as theApp
Page 9: c) Select ‘Copy an existingconfig
Page 13 and 14: a) Double-click on‘Tags’ in the
Page 15 and 16: ) In the ‘Name’ box,type in the
Page 17 and 18: a) Double-click on‘RecipePlus Set
Page 19 and 20: ) Select the‘General’ tabc) In
Page 21 and 22: 2.2 Configure the Ingredients Tab o
Page 23 and 24: Add additional Data Sets to the Rec
Page 25 and 26: a) Select the‘Units’ tab.b) Cli
Page 27 and 28: Repeat steps e) to h) to add a thir
Page 29 and 30: d) Click ‘Yes’ tooverwrite thec
Page 31: Import displays - “RecipePlus Com
Page 34 and 35: During runtime the RecipePlus Table
Page 36 and 37: ) Click on the ‘General’ tabof
Page 38 and 39: ) Click on thecheck box of ‘Initi
Page 40 and 41: 2. Modify the ingredient data value
Page 42 and 43: 3. Using the Recipe ButtonsUsing th
Page 44 and 45: d) Check in the ‘Recipe Selector
Page 46 and 47: ) Press ‘PressSTART to begin!’
Page 48 and 49: d) Click on the‘Runtime’ tab to
Page 50 and 51: c) Click on the‘Target’ tab of
Page 52 and 53: d) From RSView Studioicon menu clic
Page 54: NotesOP03 — RecipePlus52 of 52 RS

OP03 â Implementing PanelView Plus & VersaView CE with ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

OP03 â Implementing PanelView Plus & VersaView CE with ...