from SN 21001, S-60 / S-65 (PN 147769) - Genie

August 2013300 Turntable Components309.1 S-60 HC Turntable - View 2ItemPart No.DescriptionQty.12345----6789--------10------111213----14106883P1059760331190441103291107555408106884617961789498011906820973-1700604456045510782510125212846460984617548281394401394415408139366FORMING, SENSOR BRACKET.....1SCREW,HHC,1/2-13 X 1.25 GR5.....1WASHER,LOCK,0.5".......................1FORMING,ANGLE LINKAGEBRACKET........................................1BALL JOINT, 3/8-24 FEMALE.........1qty (1)NUT,HEX,JAM,3/8-24NUT,LP NYLOCK,3/8-24WELDMENT, ROTATOR ARM.........1SCREW,RHM,10-32 X 1.25.............2NUT,NYLOCK,10-32........................2SENSOR,DUAL OUTPUT,ANGLE...1(calibration required after replacement)CONN,RECEP 6 WAY ENDCAP DTWIRE LOOM,3/8 POLY SLITLOCK,RECEP 6 WAY,14-18GATERM,GOLD PIN,18-16GA REELCYLINDER, LIFT, S60HC................1SEAL KIT (88653)VALVE,COUNTERBAL,CWCK-LHN@3500VALVE,COUNTERBAL.CBBD-LJN@5000SCREW,HHC,3/8-16 X 1.................2NUT,NYLOCK,3/8-16.......................2BALL JOINT, 3/8-24 LEFT HAND.....1NUT,HEX,JAM,3/8-24, LEFT HANDNUT,LP NYLOCK,3/8-24ADJ ROD, LH/RH, 3/8-24................1Part No. 147769 S-60, S-65, S-60X, S60-XC,, S-60TRAX, S65-TRAX, S60HC 93