Getting Started With Pro/ENGINEER Wildfire 2.0 - STROJNISTVO.com

Round the Lens Corners 4-10
Add Color 4-10
Summary 4-11
Part 2: Earpiece 4-12
Create the Earpiece Extrusion 4-12
Create the First Hole 4-13
Create the Radial Pattern 4-15
Summary 4-16
Part 3: Microphone 4-17
Create the Rectangular Box 4-17
Create the First Cut 4-18
Create the Slots 4-22
Define the Horizontal and Vertical Centers 4-22
Sketch the Slot Section 4-25
Summary 4-27
Part 4: Printed Circuit Board 4-28
Create the PC Board 4-28
Create the Chamfers and Round 4-29
Add the Edge Chamfers 4-29
Add the Full Round 4-29
Place the Holes 4-30
Create the Second Hole 4-31
Copy and Mirror the Holes 4-32
Create a Datum Curve for the Keypad Reference 4-32
Summary 4-33
Part 5: Antenna 4-34
Sketch the Revolved Extrusion 4-34
Add a Round to the Top 4-37
Add the Revolved Cut 4-37
Make the Shaft Extrusion 4-39
Summary 4-40
Part 6: Keypad 4-41
Sketch the Keypad Extrusion 4-42
Round the Corners 4-43
Create the First Button 4-43
Pattern the Button 4-44
Contents ix