HERE - Densen

14GizmoRemote controlThe amplifier that started it all. Created with a passion for music No compromise is a keyword for all Densen products, includingand a love for audio, the DM-10 still defines the word musicality the DM-10. Keywords to the design are zero feedback, fast,in the Densen vocabulary. When introduced, the DM-10 created a dynamic, detailed, precise and transparent circuitry. Built withstir as it was perhaps the mostthe best components, the DM-10expensive integratedemploys a teflon PCB, goldamplifier of its time.plated input and outputToday many are moresocketry, custom-madeexpensive, but the DM-capacitors and massive10 has shown the way fordual-mono poweraffordable high end and cansupplies. These design featuresgive you manycontribute to making an amplifier that willsleepless nights in audio nirvana.drive all loads with stability and remain musically superb.Back panel connections:a: Speaker terminals. The amplifier is prepared forone pair of speakers, but has 2 separate outputs perchannel, to allow bi-wiring (separate speakers cablesfor bass and midrange/treble). Red must beconnected to red/+ on your speakers, and black toblack/- on your speakers. Left channel must beconnected to left side speakers, and right channel toright side speakers. Do not short circuit.b: Input 1 is a line input that can be converted bymounting a DP-01 MM board internally to a turntableinput.To connect the DP-01 correctly, take of the top cover,and remove the two black jumpers from the DP-01socket on the left (when seen from the back panel) ofthe small board connected to the back panel. Mountthe DP-01 so that all the large components on the DP-01 are facing towards the backpanel, and the socket isfacing downwards. Mount the DP-01 so that all 12pins on the socket on the board are mounted in theholes on the socket of the DP-01.c: Line input 2.d: Line input 3.e: Line input 4.f: Tape input 1.h: Tape output 1 (connects to line in on your Tapedeck, for recording). It is always the channel you are