HERE - Densen

15DM-10Integrated amplifierm n oal b c d e f h g h a j klistening to, that is also sent to the Tape deck forrecording, so do not switch input during recording.Tape monitoring is not possible. If you need to beable to monitor your recording, use a headphoneconnected to your tape deck. This output is notbuffered, so switch off your tape deck, when it is notin use.g: Tape input 2.h: Tape output 2 (connects to line in on your Tapedeck, for recording). It is always the channel you arelistening to, that is also sent to the Tape deck forrecording, so do not switch input during recording.Tape monitoring is not possible. If you need to beable to monitor your recording, use a headphoneconnected to your tape deck. This output is notbuffered, so switch of your tape deck, when it is not inuse.j: Main input. Only power the amplifier with themains voltage indicated on the sticker on the backpanel. The mains input also contains a socket forfuses, which must only be replaced with same type offuse as indicated on the sticker on the back panel.k: Power on/off switch.l: Ground screw for grounding of turntables.m: Volume control. Must be set to zero when the ampis not in use.n: Red light, which indicates when the amp is on.o: Selector switch. When turned fully to the left, input