Alibre Design 6.0 User Guide

Chapter 6 – Feature Creation8 Click OK to create the extrusion.To Geometry extrusionsTo Geometry – Creates an extrusion up to another reference plane or face.4 Select a Target by selecting a reference plane or face.5 You can also specify an Offset value to create the extrusion up to a specifieddistance from the Target.6 To create the extrusion in a different direction other than normal to thesketching plane, deselect the Along Normal option. Then select a linear edgeor axis to define the new extrusion direction.7 Specify a Draft Angle if necessary and click the Outward option if desired.8 You can modify Label to control how the feature name is displayed in theDesign Explorer.9 Click OK to create the extrusion.To Next extrusionsTo Next -- Creates an extrusion up to the nearest face(s) of the part.4 Select the Reverse option if necessary to create the extrusion on the opposite112