Alibre Design 6.0 User Guide

Chapter 10 – Drawings3 Modify the Callout Note as necessary.4 Modify the Leader parameters as necessary.5 Click OK when finished.To manually apply cosmetic threads:1 Move the cursor over hole. The hole is highlighted.2 Right-click and select Insert Cosmetic Threads from the pop-up menu. Thecosmetic threads are displayed for the selected hole.OR1 Select the hole.2 From the Insert menu, select Cosmetic Thread for Hole.Note: You can show the cosmetic threads for an entire view by right-clicking aview in the Drawing Explorer, or right-click a view in the work area and selectInsert Cosmetic Threads.To delete a cosmetic thread:1 Move the cursor over the cosmetic thread symbol. The cursor changes anddisplays the annotation symbol.2 Right-click on the cosmetic thread and select Delete from the pop up menu.10.7.3 DatumsIn part or assembly workspaces, you can attach datum annotations to faces of models(but not to vertices or edges). In drawing workspaces, you can place datumannotations at any location.To insert a datum annotation:1 In any type of workspace, from the Insert menu select Annotation >Datum. In a drawing workspace, select the Datum tool from theDetailing toolbar.The Datum Annotation dialog box appears.272