Ankersmid catalogue - Raci d.o.o.

More documents

Recommendations

Info

Ankersmid stationary systemSeries ASSApplicationThe stationary gas conditioning system ASS has been designed sothat detailed gas analyses can be carried out at any time and inany place.The entire gas conditioning system is installed on a mountingplate which ensures that the components can be removed easilyand gas analyses carried out quickly, safely and with minimummaintenance.DescriptionThe stationary system is suitable for variable, discontinuous andcontinuous operation. The components built into the system canbe used for standard applications. For special requirements pleaseask us for other solutions.The heated sample line is to be mounted at the gas measuringinlet terminal.A ball-valve can be fitted to the inlet terminal of the stationarysystem in order to calibrate analyser(s) with check gas.The amount of flow is determined by a sample gas diaphragmpump.The sample gas pump AMP 11P is activated automatically bymeans of an excess temperature contact on the cooler.Optional flow meters with integrated needle valve are available.The flow meters are built-in as the electronic controller. Thisunique microprocessor controlled Peltier cooler is a powerfuldesigned dew point stabiliser. The dew point is set at 4°C but canbe changed at any value between 1°C and 15°C. The gas cooler isequipped with a heat exchanger made of glass and PTFE. Heatexchanger made of full PTFE or stainless steel are also available.A preliminary fine filter (AUF) is installed at the inlet of the gassampling pump and can be equipped with a variety range of filterelements in different materials and porosities.Any condensation is continually removed by a peristaltic pump.(type ACP ASR25).• Low maintenance and self-monitoring• Dew point +4°C ± 0,1°C• Ready for use < 15 min• Compact design• Optimum reliability• Easy to mount• Universally equipped• Good chemical resistance© Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturingNeerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58
Ankersmid stationary systemASSDimensions378360358Technical dataAPS Portable system ASS 301 ASS 302 ASS 303 ASS 311 ASS 312 ASS 313Gas flow rate max. 350Nl/h 350Nl/h 350Nl/h 200Nl/h 200Nl/h 200Nl/hSample outlet dew point+1°C ..... +15°C, factory setting: +4°CDew point stability±0,1°CSample inlet temperatureMax.190°CSample inlet connectionStainless steel connection DN4/6mm, suitable for heated sample linesSample inlet dew point Max. 80°CAmbient temperature+5°C up to +45°CMaximum pressure3 bar abs.Material of gas wetted parts*Heat exchanger head PTFE PVDF SS316 PTFE PVDF SS316Heat exchanger body Glass PVDF SS316 Glass PVDF SS316Diaphragm pumpAMP 11P: Head: PPS, Valves: FFPM, Membrane: PTFE-coatedFilterhead, element holder: PTFE, filter element: PTFE, body: Duran ® glassPeristaltic pumpTube: Novoprene ® , Connectors: PVDFOthersTubing: PTFE, Inlet connector: SS316, Outlet connector: PVDFNumber of gas inlets 1Number of gas outlets 1 (standard), max. 2Filter porosity* 2µmAlarm contactFree programmable contact 1NO / 1NC, rating: 250V, 16A ACTotal cooling capacity Max. 225kJ/h Max. 215kJ/hStorage temperature -25 °C up to +65 °CReady for operation< 15 minPower supply230V/50Hz or 115V/60HzPower consumption100VADimensions 500mm x 400mm x 200mm (W x H x D)Electrical connectionCold appliance plug with 1,5 m of cableElectrical protectionFuse 2AElectrical equipment standardEN61010Maximum values in technical data’s must be rated in consideration of total cooling capacity at 25°C ambient temperature and 5°C outlet dew pointPTFE = Polytetrafluoroethylene (Teflon ® ) PVDF = PolyvinylidenfluorideFFPM = Perfluorelastomer (Kalrez ® ) PPS = Polypropylenesulphide (Ryton ® )* Other versions on request© Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturingNeerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58
Page 1 and 2:
Product CatalogueAnkersmid Sampling
Page 3 and 4:
Sales Agencies / DistributorsIntern
Page 5 and 6:
Components for the sampling techniq
Page 7 and 8:
Stationary Gas Sample Probe Series
Page 9 and 10:
Pictures121 Sample Probe type ASP 3
Page 11:
Gas Sample Probe Series ASPVersion
Page 15 and 16:
Technical dataGas Sample Probe Vers
Page 19 and 20:
Technical dataGas Sample Probe Vers
Page 21:
Electrically heated sample tubeAST
Page 25 and 26:
Ankersmid Heated lines series AHLfo
Page 28 and 29:
Technical dataTemperature controlle
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
EquipmentCondensate removalEach hea
Page 38 and 39:
ANKERSMID Peltier coolerAPC 30x Ser
Page 40 and 41:
Technical Data APC - Ankersmid Pelt
Page 42 and 43:
3-3.2ANKERSMID Peltier coolerAPC 4x
Page 44 and 45:
ANKERSMID Ambient coolerAAC 15x/16x
Page 46 and 47:
ANKERSMID Universal condensatesepar
Page 48 and 49:
ANKERSMID Automatic liquid drainALD
Page 50 and 51:
Available typesModelACV 010ACV 020A
Page 52 and 53:
Ankersmid Liquid Alarm sensorALA 00
Page 54 and 55:
Technical dataModel ALA 101/102Cont
Page 56 and 57:
DimensionsFilter unit without drain
Page 58 and 59:
DimensionsNPT ¼”125 (for filter
Page 60 and 61:
DimensionsAAF 051 AAF 053© Ankersm
Page 62 and 63:
Dimensions(*)235 (for filter elemen
Page 64 and 65:
DimensionsSample connections: Gas i
Page 66 and 67:
DimensionsG ¼”GL25 connection wi
Page 68 and 69:
DimensionsGraphics© Ankersmid Prod
Page 70 and 71:
Ankersmid Flow MeterAFM 10XApplicat
Page 72 and 73:
6-1.16-1.1Ankersmid Peristaltic pum
Page 74 and 75:
Dimensions and performance characte
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
ANKERSMID AMP 26CMini Diaphragm Vac
Page 84 and 85:
ANKERSMID AMP 26 E/SMINI DIAPHRAGM
Page 86 and 87:
ANKERSMID AMP 11EMini Vacuum PumpsP
Page 88 and 89:
Ankersmid NO 2 - NO ConverterType A
Page 90 and 91:
Ankersmid Ball ValvesPANAM ‘PBV
Page 92 and 93:
PANAM316SS INSTRUMENTATION BALL VAL
Page 94 and 95:
Check valve dimensionsPart No Inlet
Page 96 and 97:
Ankersmid Needle ValvesPANAM ‘PNV
Page 98 and 99:
© Ankersmid Products, http://www.a
Page 100 and 101:
Page 102 and 103:
Ankersmid Gauge Root ValvesPANAM
Page 104 and 105:
"PANAM" GAUGE ROOT VALVESNO DESCRIP
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127: © Ankersmid Products, http://www.a
Page 170 and 171: Specification APAN1Material bodyAIS
Page 172 and 173: Specification APRMaterial bodyAISI
Page 174 and 175: Ankersmid Portable systemSeries APS
Page 178 and 179: Ankersmid Digital systemADSApplicat
Page 180 and 181: Ankersmid Touch-screen displayPLC c
Page 182 and 183: Dimensions© Ankersmid Products, ht
Page 184 and 185: Dimensions© Ankersmid Products, ht
Page 186: Ankersmid I/O expansion modulefor A
show all

Ankersmid catalogue - Raci d.o.o.

Create successful ePaper yourself

Delete template?

Save as template?