Ankersmid catalogue - Raci d.o.o.

Technical dataTemperature controller type ATC 801/801sTemperature sensor inputSwitching capacityFunctionsPt100 0…600°CNiCr-Ni (Type K) 0...999 °CFe--CuNi (Type J) 0...600 °CNominal 2300W (10A)Two-position controller as P controllerTwo-position controller as PID controllerThermal cut-out (permanent disconnection)Selector modeTemperature controller with setting of outputpercentageStand-by modeAccuracy class 1Power supply*/Power consumptionHousing version230V/50HzWall-mounting housingInternational protection type IP 54Housing materialPolycarbonateDimensions in mm 125 x 125 x 75 (w x h x d)Consumer unit & sensor connectionIndicationsOption (= ATC 801s)Possible settings7-pin multipole socket,incl. 1.5m power cable with earth contact type plug4-digit,7-segment display (LED) with 3-digit temperaturedisplay in °C (normal operation) as well as display ofparameters and entry values during operator mode.Yellow LED for indicating the operating state,Red/green LED for signalling the temperatureSignal relay 6A (changeover contact),for 230V units only3-pin connector according to DIN 41524Set-point value corresponding to sensor typeSignal threshold for insufficient temperature 0...30 KSignal threshold for excess temperature 0...30 KSet-point limits (upper and lower)Line compensation/zero point correctionSensor break responsePre-selection of output percentage 0...99 %© Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturingNeerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58