Ankersmid catalogue - Raci d.o.o.

ANKERSMID HumidifierAHU seriesApplicationThe Ankersmid Humidifier controls the humidity of the gassample stream. The Humidifier is used to wet calibrationgases to ensure these gases undergo an identical cyclethrough the conditioning set-up.In this set-up, the calibration gases enter the cooler saturatedat a stable dew point. Calibration gases with water-solublecomponents must not be passed through the humidifier.* Picture may varyDescriptionThe Ankersmid Humidifier consists of a standard filtercomponent. The glass body version has a volume of 70ml.The gas passes a bubbler that boosts the humidifying result.The humidifier’s glass body enables the control of the liquidlevel without dismantling the body. No tools are required forrefilling the humidifier. An o-ring guarantees tightnessbetween the head and the glass body.• Easy refilling• Direct control of the liquid level• Optimum humidifying effect• Small stagnant space• Wall-mountingFor special applications, the humidifier can be provided with aGL25-12 connection at the bottom of the glass body.Over-pressure at the outlet or under-pressure at the inlet ofthe humidifier must be avoided, to avoid liquid flow into thegas inlet.A special bracket is available to click these filters on theAnkersmid Modular System, eliminating the need for drillingand screwing.The humidifier can be rotated about 180° in the holder forwall mounting or Ankersmid Modular System. This allows fora flexible adaptation of in- and outlet to local conditions.© Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturingNeerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58