Full Line Product Catalog Full Line P rod uct C atalog - Marine Office

CZone DIGITAl CoNTRol & MoNIToRINGTMSignal InterfaceThe Signal Interface (SI) connects the CZone system toyour external sensors, alarms and switching devices. The SIallows intelligent, automated operation of circuits dependingon the state of the input. For example, the SI can be easilyprogrammed to allow a fluid transfer pump and an alarm to turnon simultaneously when the SI detects that a low tank level hasbeen reached.Connect standard switches to the SI to allow control of theCZone system outputs.The module provides LED status indications for each input. Thisallows fast diagnostics while providing information back to theCZone’s Display Interface.• Accepts inputs from traditional switch types being used tocontrol outputs• Accepts inputs from switches to trigger alarm i.e. high waterfloat switch• Accepts inputs from industry standard tank senders (0-5V, 10-180Ohm, 240-33Ohm)• Accepts inputs from general voltaic or resistive signals can beused for controlling outputs or to display a physical position i.e.show a hatch is partially open• LED status indicators for each input• H 100mm (3-29/32") x W 156mm (6-3/32") x D 42mm (1-5/8")• IPX5 water ingress protection• Outputs standard NMEA 2000 sentences• Resistive input range 0–1000 Ohms• Voltage sensing input range 0–34VDCSignalStatusIndicatorItem #Description80-911-0013-00 Signal Interface w/seals, connector80-911-0014-00 Signal Interface onlyCAN Network Status IndicatorMARINE SYSTEMS MANAGEMENTTerminal BlockWaterproof Cable SealNMEA 2000 ConnectorMARINCO | marinco.com | 143