Full Line Product Catalog Full Line P rod uct C atalog - Marine Office

CZone DIGITAl CoNTRol & MoNIToRINGTMMARINE SYSTEMS MANAGEMENTMeter InterfaceThe Meter Interface (MI) accepts inputs from external AC andDC power metering sensors. It then processes and converts theanalog signals into digital strings that can then be presented, bythe display, to the user, as one of several, easy-to-understandformats such as:AC and DC voltage and ampsAC KilowattsDC battery capacity in amp hours and % remainingAll with user definable high and low alarmsIntelligence is built into the CZone system. The MI can calculatethe battery capacity as ampere hours and/or percentage ofcharge remaining. Since the CZone system provides bothmonitoring and control for DC systems, it can be configuredto turn off non-essential circuits in the event that the batteryis discharged to a low level. This helps to ensure that there isenough charge left in the battery to power safety critical circuits.AC• 3 x AC voltage inputs (multi voltage)• 2 x AC current inputs• Calculates true RMS powerDC• 3 x DC voltage inputs (multi voltage)• 2 x DC current inputs• Calculates battery capacity as Ampere hoursand percentage charge remaining• Resolution for current metering down to 0.1AGeneral• H 100mm (3-29/32") x W156mm (6-3/32") xD 42mm (1-5/8")• IPX5 water ingress protection• Outputs standard NMEA 2000 powermonitoring sentencesNote: High and low alarm levels can be setfor all inputsAC VoltageIndicatorDC VoltageIndicatorNetworkStatus IndicatorItem #Description80-911-0005-00 Meter Interface, w/seal & plug80-911-0006-00 Meter Interface onlyTerminal BlockWaterproof Cable SealNMEA 2000 Connector144 | MARINCO | marinco.com