OBSAH

Inalfa Event Spoiler Series Installation and Service ManualF. Service Set InstructionsF.3 Wind Deflector cont.InstallInsert the wind deflector arms into slots in the mechanism guide.Pivot the wind deflector forward and downRe-attach the plastic wind deflector covers by snapping them into position.Close the glass panel to check for proper function.F.4 Locking SlidersRemovalRemove Glass Panel (see D.2.1)Remove both locking sliders from the mechanism by sliding it to the front. Ifat one side the locking slider is not broken break the part as shown in image.InstallSlide the new locking slider from the front side in abackwards movement on the mechanism.Click the front hook of the locking slider on the mechanism.Prior to re-installing the glass panel, fully cycle the mechanism. Return the mechanism tothe full open position afterwards.Re-install the Glass Panel (See D.2.1)F.5 Mechanism LH/RHRemovalRemove Glass Panel (see D.2.1).Remove the Headliner substrate assembly.Remove the motor connector from the SCU.Remove the clamp frame and motor; take the frame assembly out of the vehicle and laythe frame assembly upside down on a bench.Clean the roof skin of the vehicle23 Service Guide