ODU MINI-SNAP®

ODU MINI-SNAP® Series FImportant Issues at a GlanceTurned ContactProduct DescriptionProduct DescriptionCertificationThe series is certified acc. to RoHS and has licenses acc. toVDE and UL.5 SizesMetal housing available in 5 sizes.Outside diameter between 9.4 mm and 18 mm.Number of contacts: 2 to 27 positions, mixed insertspossible.Extensive range of termination possibilitiesPlugs and in-line receptacles for solder and crimptermination. Receptacles for solder, crimp and PCB termination.Applications and materialsGeneral application requirements(– 40° C to +120° C)Connectors which are autoclavable(+134° C, see page 78)Termination technologiesInsulatormaterialPEEK●●ContactmaterialMs●●Turned contacts are available in the diameters 0.5 mm to1.3 mm. They are available with following terminations:Solder, crimp and print (PCB).Mating cycles > 5,000MaterialBrassTreatment processing Ni, AuFor information regarding diameter, termination styleand current carrying capacity please see the contactconfiguration section.Standard pin contactsSolder Crimp-clip Print (PCB)InsulatormaterialPEEKContactmaterialMsCrimp termination ● 1 ●Solder termination ● ●Printed circuit board (PCB) termination ● ●1 Crimp-clip-contacts available with diameter 0.7 mm and 0.9 mm.Protection class IP 50 and IP 68 are available.www.odu.dePage 7