On-Board Type (DC) EMI Suppression Filters (EMIFILr)
On-Board Type (DC) EMI Suppression Filters ("EMIFIL")
On-Board Type (DC) EMI Suppression Filters ("EMIFIL")
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
!Note • This !Note PDF catalog • Please is downloaded read rating and from !CAUTION the website (for of Murata storage, Manufacturing operating, rating, co., ltd. soldering, Therefore, mounting it’s specifications and handling) are in subject this catalog to change to prevent or our smoking products and/or in it may burning, be discontinued etc. without advance notice. Please check with our<br />
sales representatives • This catalog or product has only engineers typical specifications before ordering. because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.<br />
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.<br />
C31E.pdf<br />
08.9.1<br />
<strong>On</strong>-<strong>Board</strong> <strong>Type</strong> (<strong>DC</strong>) <strong>EMI</strong> <strong>Suppression</strong> <strong>Filters</strong> (<strong>EMI</strong>FILr)<br />
Chip Ferrite Beads Part Numbering<br />
Chip Ferrite Beads<br />
1<br />
(Part Number)<br />
BL<br />
q<br />
M<br />
w<br />
18 AG 102 S N 1 D<br />
e r t y u i o<br />
qProduct ID<br />
tImpedance<br />
Product ID<br />
BL<br />
Chip Ferrite Beads<br />
Expressed by three figures. The unit is in ohm (Ω) at 100MHz. The<br />
first and second figures are significant digits, and the third figure<br />
expresses the number of zeros which follow the two figures.<br />
w<strong>Type</strong><br />
yElectrode<br />
Code<br />
A<br />
<strong>Type</strong><br />
Array <strong>Type</strong><br />
Expressed by a letter.<br />
Ex.) Code<br />
Electrode<br />
M<br />
Monolithic <strong>Type</strong><br />
S/T<br />
Sn Plating<br />
eDimensions (LgW)<br />
A<br />
Au Plating<br />
Code<br />
Dimensions (LgW)<br />
EIA<br />
uCategory<br />
02<br />
0.4g0.2mm<br />
01005<br />
Code<br />
Category<br />
03<br />
0.6g0.3mm<br />
0201<br />
N<br />
Standard <strong>Type</strong><br />
15<br />
18<br />
1.0g0.5mm<br />
1.6g0.8mm<br />
0402<br />
0603<br />
iNumber of Circuits<br />
2A<br />
2.0g1.0mm<br />
0804<br />
Code<br />
Number of Circuits<br />
21<br />
2.0g1.25mm<br />
0805<br />
1<br />
1 Circuit<br />
31<br />
3.2g1.6mm<br />
1206<br />
4<br />
4 Circuits<br />
41<br />
4.5g1.6mm<br />
1806<br />
rCharacteristics/Applications<br />
Code *1<br />
Characteristics/Applications<br />
AG<br />
for General Use<br />
TG<br />
BA<br />
BB<br />
for High-speed Signal Lines<br />
BD<br />
PD<br />
PG<br />
for Power Supplies<br />
KG<br />
SG<br />
for Power Supplies (Low <strong>DC</strong> Resistance <strong>Type</strong>)<br />
RK<br />
for Digital Interface<br />
HG<br />
for GHz Band General Use<br />
EG for GHz Band General Use (Low <strong>DC</strong> Resistance <strong>Type</strong>)<br />
HB<br />
HD<br />
for GHz Band High-speed Signal Lines<br />
HE<br />
HK<br />
for GHz Band Digital Interface<br />
GA<br />
for High-GHz Band High-speed Signal Lines<br />
GG<br />
for High-GHz Band General Use<br />
*1 Frequency characteristics vary with each code.<br />
Series<br />
BLM02/03/15/18/21, BLA2A/31<br />
BLM18<br />
BLM15/18<br />
BLM03/15/18/21, BLA2A<br />
BLM03/15/18/21, BLA2A/31<br />
BLM15<br />
BLM03/15/18/21/31/41<br />
BLM18<br />
BLM18<br />
BLM18/21<br />
BLM15/18<br />
BLM15/18<br />
BLM18<br />
BLM15<br />
BLM15/18<br />
Continued on the following page.<br />
13
Change language