On-Board Type (DC) EMI Suppression Filters (EMIFILr)
On-Board Type (DC) EMI Suppression Filters ("EMIFIL")
On-Board Type (DC) EMI Suppression Filters ("EMIFIL")
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
!Note • This !Note PDF catalog • Please is downloaded read rating and from !CAUTION the website (for of Murata storage, Manufacturing operating, rating, co., ltd. soldering, Therefore, mounting it’s specifications and handling) are in subject this catalog to change to prevent or our smoking products and/or in it may burning, be discontinued etc. without advance notice. Please check with our<br />
sales representatives • This catalog or product has only engineers typical specifications before ordering. because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.<br />
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.<br />
C31E.pdf<br />
08.9.1<br />
<strong>EMI</strong>FILr (Soldering and Mounting)<br />
Continued from the preceding page.<br />
Land Pattern<br />
+ Solder Resist<br />
Land Pattern<br />
Solder Resist<br />
(in mm)<br />
DLM11G<br />
DLM2HG<br />
DLP0NS<br />
DLP11S<br />
DLP2AD<br />
DLP31S<br />
DLP31D<br />
DLW21S<br />
DLW21H<br />
DLW31S<br />
DLW5AH<br />
DLW5BS<br />
DLW5BT<br />
oReflow and Flow<br />
DLM2HG<br />
2.0<br />
1.2<br />
0.4<br />
1.0<br />
4.0<br />
2.1<br />
DLP31S<br />
1.0 0.6 1.0<br />
0.7 0.7<br />
2.2-2.6<br />
0.8<br />
DLP31D<br />
2.8<br />
0.8 pitch 0.4<br />
oReflow Soldering<br />
DLP0NS<br />
DLP11S<br />
DLP2AD<br />
DLM11G<br />
0.30<br />
0.3<br />
1.75<br />
0.25<br />
0.50<br />
0.3<br />
0.80<br />
0.55<br />
0.85<br />
1.1<br />
0.3<br />
0.90<br />
DLW21S/21H/31S<br />
0.55<br />
1.95<br />
0.3<br />
1.5<br />
0.4<br />
0.5<br />
0.5<br />
1.5<br />
∗2<br />
c<br />
∗1<br />
Series<br />
DLW21S/H<br />
a<br />
0.8<br />
b<br />
2.6<br />
c<br />
0.4<br />
d<br />
1.2<br />
d<br />
DLW31S<br />
1.6<br />
3.7<br />
0.4<br />
1.6<br />
∗3<br />
a<br />
b<br />
DLW5AH/5BS/5BT<br />
(2)<br />
(1)<br />
1.3<br />
3.3<br />
4.7<br />
∗ 1: If the pattern is made with wider than 1.2mm (DLW21) /<br />
1.6mm (DLW31S) it may result in components turning<br />
around, because melting speed is different. In the worst<br />
case, short circuit between lines may occur.<br />
∗ 2: If the pattern is made with less than 0.4mm, in the worst<br />
case, short circuit between lines may occur due to spread<br />
of soldering paste or mount placing accuracy.<br />
∗ 3: If the pattern is made with wider than 0.8mm (DLW21) /<br />
1.6mm (DLW31S), the bending strength will be reduced.<br />
Do not use gild pattern; excess soldering heat may dissolve<br />
metal of a copper wire.<br />
(3)<br />
0.9<br />
(4)<br />
6<br />
2.9<br />
5.5<br />
*(1), (2), (3), (4): Terminal Number<br />
Continued on the following page.<br />
180
Change language