BENSON OUH² OIL UNIT HEATER

~ C O N T E N T S ~
11 User Instructions …………………………………………………………...………. 40
11.1 Commissioning/hand over ……………………………….……….……... 40
11.2 Servicing ……………………………….…………………………..…….… 40
11.3 Start up procedure ……………………………….…………….….……. 40
S E C T I O N 1
11.4 Stop procedure ……………………………….……………………………. 40
11.5 Shutdown procedure ……………………………….……………...……... 40
1.011.6 Compliance Ventilation Notices only ……………………………….…………………..….…..... 4
40
1.111.7 Certificates Lockout of Conformity situations ……………………………….…...………..………. 5
40
1.2 General Product Information 5
1.3 General Requirements 5
Illustrations
1.4 Delivery & Pre-installation Checks 6
1.51 Warranty Oil Systems ………………………………………………………...……………. 6
10
2 Turbulator positions …………….…………………………………………………. 23
2.0 Location & Positioning 7
2.1 Gas Supply 9
Any reference made to Laws, Standards, Directives, Codes of Practice or other
2.2 Electrical Supply 9
recommendations governing the application and installation of heating appliances and
which 2.3 Air may Supply be referred to in Brochures, Specifications, Quotations, 9 and Installation,
Operation 2.4 Minimum and Space Maintenance Requirements manuals is done so for information and 12 guidance purposes only
2.5 and Air should Distribution only be considered System valid at the time of the publication. 12 Benson Heating cannot
2.6 be held Flue responsible System from any matters arising from the revision 13 to or introduction of new
2.7 Laws, Flue Standards, Installation Directives, Codes of Practice or other recommendations. 13
3.0 Installation 16
3.1 Bio Packaging fuel statement. & Siting 16
3.2 Flooring 16
3.3 All our Minimum oil fired Clearances heater products are configured for
16
3.4 use Assembly on both Class D light distillate fuel oil.
16
3.5 Gas Installation and Connection 17
3.6 As a Electrical result of recent Installation changes & Connection made to European
17
3.7 legislation Air Distribution regarding Installation the specification of class D
17
3.8 heating Warm oil Air to Registers allow for the inclusion of 7% FAME
17
3.9 (Fatty Heater Acid Control Methyl Installation Ester) i.e. bio fuel and
18
effective from early 2011, all oil fired air heater
4.0
products
Commissioning
and installations maybe affected.
18
4.1 Pre-Test 18
From April 2011 all our oil fired unit heaters
4.2
will
Ignition
be fitted with Riello burners which are bio
19
4.3 fuel Air compatible Delivery for System blends up to 10%.
21
4.4 Hand Over 21
Please note that the use of bio fuels may give rise
5.0 to a Servicing number of installation issues, to both new
22
5.1 and Planned existing plant Servicing which could affect the warranty
22
5.2 of the Servicing burner. We Procedure recommend - Major that Component you familiarise Parts 22
5.3 yourself Servicing with current - Re-commissioning information from both the
25
6.0 burner Fault manufacturer Diagnosis Riello By Flow and OFTEC. Charts 26
7.0 Wiring Diagrams by Model and Burner Type 28
8.0 Technical Data Net Efficiency Calculations 35
8.1 Benson Cabinet Range Data 36
9.0 Reference Documents Standards, Codes of Practice 39
9.1 Parts Listing 40
3