INSTRUMENTATION

RE-Y(St)YSWAY(ö)-fl PIMF / TIMF
RE-2Y(St)YSWAY(ö)-fl PIMF / TIMF
RE-2X(St)YSWAY(ö)-fl PIMF / TIMF
EN 50288-7
Multi-Pair, Individual and Overall Screened, Round Steel Wire Armoured, Oil Resistant Instrumentation Cables
300 V - 500 V
KLAS KABLO RE-Y(St)YSWAY(ö)-fl PIMF / TIMF
APPLICATION
These cables are generally employed in instrumentation and control systems, analog and digital signal transmission of chemical and petrochemical industrial premises,
power plants, natural gas and petroleum industries, etc. Direct connection is not permitted under ambient with a low impedance sources. Cables with blue sheaths are
suitable for security system applications. The cable armour protects the cable against mechanical impacts. Furthermore, these cables can directly be buried in the soil.
They are suitable in dry and wet indoor and outdoor installations.
CONSTRUCTION
1-Inner Conductor
2-Insulation
3-Individual Screening
4-Communication Core
5-Lay-Up
6-Overall Screening
7-Inner Sheath
8-Armouring
9-Outer sheath
• Electrolytic stranded annealed copper wire (IEC 60228, Class 2)
Y
• PVC (EN 50290-2-21)
2Y
PE (EN 50290-2-23)
2X
XLPE (EN 50290-2-29)
• Double cores are fixed with PES tape, 0,60 mmØ mono tinned drain wire and AL-PES tape with screened.
Triple cores are fixed with PES tape, 0,60 mmØ mono tinned drain wire and AL-PES tape with screened.
.• 0,50 mm² (7x0,30 mm) tinned or annealed standed copper, PE or XLPE insulated orange core.
(More than one double or triple cables)
• Screened pair cores are strand communication core with together twisted layers. Fixed with PES tape.
PIMF
TIMF
(St)
• %100 Coverage AL-PES tape and 0,50 mm² (7x0,30 mm) tinned strand drain wire with screened..
Y
• PVC sheath (EN 50290-2-22)
SWA
• Round galvanized steel wire armours
Y(ö)
• PVC sheath (Aliphatic Hydrocarbon Resistant ), RAL 9005 Black, RAL 5015 Blue veya RAL 7001 Grey
GENERAL FEATURES
Flame Retardent
(For a single cable)
> IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2
Mineral Oil Resistance > HD 505.2.1
Flame Retardent
(For a Bunch Cable)
> IEC 60332-3-24, EN 60332-3-24, VDE 0482-332-3-24
Determination of Flame Particles > IEC 60332-1-3, EN 60332-1-3, VDE 0482-332-1-3
Test (Test of determination of
flaming droplets)
Oil Resistance
> ICEA S-82-552
ALTERNATIVE CABLE STRUCTURES
Insulation
Individual Screening
Screen Features
Armour Specifications
Yw – Heat-resistant PVC (105 °C),
QIMF – Quad stranded screened
Aliphatic Hydrocarbon
Resistance
UV Resistance
C – Braid screen, (St)C – AL foil+Braid screen, CuB – Copper tape screened
B – Double layer steel or brass tapes, Q – Galvanized coated steel wire braid
> NF M 87-202
CORE COLOURS 300 V 500 V
> Only valid for Black sheath cables.
TECHNICAL PROPERTIESTIES
PVC (Y) PE (2Y) XLPE (2X)
Fixed Flexible Fixed Flexible Fixed
Flexible
Temperature Range (°C) -30 °C …. +70 °C -5 °C …. +50 °C -30 °C …. +70 °C -5 °C …. +50 °C -30 °C …. +90 °C -5 °C …. +50 °C
Min. Bending Radius (mm)
10xD
ELECTRICAL CHARACTERISTICS
300 V 500 V
Cross Section (mm²)
0,5 0,75 1,0 1,3 1,5 2,5 0,5 0,75 1,0 1,3 1,5 2,5
Conductor DC Resistance (Ω/km)
36,8 25,0 18,5 14,2 12,3 7,56 36,8 25,0 18,5 14,2 12,3 7,56
Insulation Resistance (M.Ω.km) PVC: ≥ 10 PE ve XLPE : ≥ 5000
PVC: ≥ 10 PE ve XLPE : ≥ 5000
Capacity (800 MHz) (pF/m)
PVC: < 250 PE ve XLPE : < 150
PVC: < 250 PE ve XLPE : < 150
Capacity Unbalance
PE for materials : 500 pF/ 500 m
PE for materials : 500 pF/ 500 m
L/R Raito (max.) (μH/Ω)
25 25 25 40 40 60 25 25 25 40 40 60
Operating Voltage
Max. 300 V
Max. 500 V
Test Voltage (V ac) 1 minutes
1000
2000
OIL RESISTANCE PVC SHEATHED
INSTRUMENTATION CABLES
6.35
www.klaskablo.com