INSTRUMENTATION

RE-2Y(St)HSWAH-fl PIMF / TIMF
RE-2X(St)HSWAH-fl PIMF / TIMF
EN 50288-7
Multi-Pair, Individual and Overall Screened, Round Steel Wire Armoured, Instrumentation Cables
300 V-500 V
KLAS KABLO RE-2Y(St)HSWAH-fl PIMF / TIMF
APPLICATION
These cables are generally employed in instrumentation and control systems, analog and digital signal transmission of chemical and petrochemical industrial
premises, power plants, natural gas and petroleum industries, etc. Direct connection is not permitted under ambient with a low impedance sources. Cables with blue
sheaths are suitable for security system applications. Furthermore, these cables can directly be buried in the soil. They are suitable in dry and wet indoor and outdoor
installations.
YAPI
1-Inner conductor
2-Insulation
3-Individual Screen
4-Communication Core
5-Lay-Up
6-Overall Screen
7-Inner Sheath
8-Armouring
9-Outer Sheath
2Y
2X
PIMF
TIMF
(St)
H
SWA
H
• Electrolytic stranded annealed copper wire (IEC 60228, Class 2)
• PE (EN 50290-2-23)
XLPE (EN 50290-2-29)
• Dual cores are fixed with PES tape 0,60 mmØ with screened mono tinned drain wire and AL-PES tape.
Triple cores are fixed with PES tape, 0,60 mmØ mono tinned drain wire and AL-PES tape with screened..
• 0,50 mm² (7x0,30 mm) Tinned or annealed stranded copper, PE or XLPE insulated orange core.
(Multi pair or triple cables)
• Screened pair cores are strand communication core with together twisted layers. Fixed with PES tape.
• %100 coverage AL-PES tape and 0,50 mm² (7x0,30 mm) screened with tinned strand drain wire.
• HFFR sheath (EN 50290-2-27)
• Round galvanized steel wire armour
• HFFR Sheath (EN 50290-2-27), RAL 9005 Black, RAL 5015 Blue or RAL 7001 Grey
GENERAL FEATURES
Flame Retardent
(For a single cable)
TECHNICAL PROPERTIES PE (2Y) XLPE (2X)
Fixed
Flexible
Fixed
Flexible
Temperature Range (°C) -30 °C …. +70 °C -5 °C …. +50 °C -30 °C …. +90 °C
-5 °C …. +50 °C
Min. Bending Radius (mm)
10xD
ELECTRICAL CHARACTERISTICS
300 V 500 V
Cross Section (mm²)
0,5 0,75 1,0 1,3 1,5 2,5 0,5 0,75 1,0 1,3 1,5 2,5
Conductor DC Resistance (Ω/km)
36,8 25,0 18,5 14,2 12,3 7,56 36,8 25,0 18,5 14,2 12,3 7,56
Insulation Resistance (M.Ω.km) PE ve XLPE : ≥ 5000
PE ve XLPE : ≥ 5000
Capacity (800 MHz) (pF/m)
PE ve XLPE : < 150
PE ve XLPE : < 150
Capacity Unbalance
PE for Materials : 500 pF/ 500 m
PE for Materials : 500 pF/ 500 m
L/R Raito (max.) (μH/Ω)
25 25 25 40 40 60 25 25 25 40 40 60
Operating Voltage
Max. 300 V
Max. 500 V
Test Voltage (V ac) 1 minutes
1000
2000
ALTERNATIVE CABLE CONSTRUCTIONS
Insulation
H – Halogen Free
Individual Screen
Screen Features
Armour Features
> IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2
Flame Retardent (For > IEC 60332-3-24, EN 60332-3-24, VDE 0482-332-3-24
a Bunch Cable )
Determination of Flame > IEC 60332-1-3, EN 60332-1-3, VDE 0482-332-1-3
Particles Test (Test of determination
of flaming droplets)
Halogen Acid > IEC 60754-1, EN 50267-2-1, VDE 0482-267-2-1
Gas Test
QIMF – Quad stranded screen
Acidic (Corrosive)
Gas Test
Oil Resistance
UV Resistance
> ICEA S-82-552
C – Braid screen, (St)C – AL foil+Braid screen, CuB – Copper tape screened
B – Double layer steel or brass tapes, Q – Galvanized coated steel wire braid
> Only valid for Black sheath cables..
CORE COLOURS 300 V 500 V
> IEC 60754-2, EN 50267-2-2, VDE 0482-267-2-2
Smoke Density Test > IEC 61034-2, EN 61034-2, VDE 0482-1034-2
HFFR SHEATHED
INSTRUMENTATION CABLES
6.55
www.klaskablo.com