700RC
Hobby World Corporation - Centuryhelimedia.com
Hobby World Corporation - Centuryhelimedia.com
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PULL START ASSEMBLY (OPTIONAL)<br />
T<strong>700RC</strong> GASSER CONVERSION<br />
1<br />
2<br />
5<br />
4<br />
3<br />
4<br />
Congratulations on finishing the build of the gasser conversion for your T700. Please follow your<br />
instruction manual on setting up your transmitter and gyro systems. Also it is very important<br />
that you follow the instructions included with the Zenoah engine for the break in process and<br />
finally tuning the engine. If the steps are not followed your engine will not perform at it’s optimum<br />
levels.<br />
CNM4X10FHCS<br />
CNM4LOCK<br />
CNM4X10CS<br />
No. Part #<br />
Description Qty<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
CNM4X10FHCS M4x10 Flush Head Cap Screws ( 斜 头 内 六 角 螺 丝 )(OPTIONAL) 4<br />
HWC2103 Pull Start Mounting Plate ( 手 拉 板 )(OPTIONAL)<br />
1<br />
CN2354 Pull Start ( 手 拉 器 )(OPTIONAL)<br />
1<br />
CNM4LOCK M4 Locknut ( 螺 母 )(OPTIONAL)<br />
4<br />
CNM4X10CS M4x10 Cap Screw ( 杯 头 内 六 角 螺 丝 )(OPTIONAL)<br />
4<br />
HWC2103 3x5.8x5.5 Spacers ( 铝 套 )(OPTIONAL)<br />
4<br />
Page 23
Change language