DiMAX Navigator

MASSOTH
DiMAX transducer). Let us explain the assembly of a shuttle operation: at each location on the track where a
locomotive is supposed to stop, a reed contact must be installed. Take into calculation the stopping distance of
the locomotive. Mount the magnet under the gearbox of the locomotive which is supposed to trigger the
automatic action. Connect the contacts according to the wire diagram of the feedback module.
The 5 steps of programming are:
• Consecutive numbers from 1 to 16
• Define the contact numbers, up to 2048 contacts with 2 trigger directions each. (former “-->”
corresponds to contact 1a, former “ or