JFE-680

More documents

Recommendations

Info

10. Disposal 10.1 Disposal of this equipment Please dispose of this equipment following the guidelines of the local body governing the location at which the equipment is disposed of. 10. Disposal 42
11. Specifications Display 10.4 inch TFT LCD (640 x 480 pixels) Frequency 200kHz / 50kHz Echo color 8 colors or 8 level monochrome Digital depth 4 digit (0.1m) Range 10, 20, 50, 100, 200, 500, 800m Depth accuracy ±2.5% Minimum sounding depth 200kHz : 1.0m, 50kHz : 2m Draft adjust 50m in 0.1m steps 171PRR (10, 20, 50m) TX pulse 86PRR (100, 200m) repetition rate 43PRR (500, 800m) Presentation mode Standard, History, Docking Time range of echo display 5, 10, 20, 30min Auto function Gain, Range Alarm function Depth, Power fail, System error Preview function 24hour Transducer 200kHz : UT-200ND 50kHz : UT-50MD Power supply 100-115/200-230VAC±15%, 50Hz/60Hz±5% 24VDC (only use for power fail monitoring) Power consumption Less than 50W Water proofing IPX2 drip proof Input nav. data IEC61162-1NMEA0183 RMA, RMC, GGA, GLL, VTG, ZDA Input ACK signal Input signals IEC61162-1NMEA0183 ALR Power fail alarm ACK: (Contact input: 12VDC 2.4mA, current control: 12VDC 1.2mA) Depth alarm ACK, System alarm ACK: (Contact input: 5VDC 5mA, current control: 12VDC 1.2mA) Output depth value data IEC61162-1 (NMEA0183 V1.5) IEC61162-1 (NMEA0183 V2.3) DBS, DBT, DBK DPT every 1 second every 1 second Output alarm data IEC61162-1 (NMEA0183) ALR every 1 second Output system data (IEC61162-1) PJRCL PJRCM (90) PJRCM (88, 89) UTC UTC every 10 seconds every 0 to 4 hours every 0 to 4 hours Output PC data Output signals Ambient temperature Relative humidity PJRCP Power fail alarm, Depth alarm, System alarm: (Relay contact output: rated load 120VAC 10A, 30VDC 8A, NO/NC) –15°C to 55°C / operating –25°C to 70°C / storage less than 93%RH under 40°C condition (non-condensing) / operating less than 93%RH under 40°C condition (non-condensing) / storage 11. Specification 43
Page 1 and 2:
JFE-680 Echo Sounder INSTRUCTION MA
Page 3 and 4: General Information Thank you for p
Page 5 and 6: Before You Begin Symbols Used In Th
Page 7 and 8: Do not damage, break or modify the
Page 9 and 10: Do not turn on the equipment's powe
Page 11 and 12: Contents General Information ......
Page 13 and 14: 1. Introduction 1.1 Function The JF
Page 15 and 16: 1.4 Construction Equipment Outline
Page 17 and 18: 1.5 System Configuration 1. Introdu
Page 19 and 20: 3. Display 3.1 Standard mode (dual
Page 21 and 22: 3.3 Docking mode 3. Display 9
Page 23 and 24: Setting Depth Range Each time you p
Page 25 and 26: Selecting Display Mode Pressing the
Page 27 and 28: Menu Tree 2 4. Operation 15
Page 29 and 30: Display Settings DISPLAY SCROLL SPE
Page 31 and 32: Initial Settings INITIAL MEMORY INT
Page 33 and 34: Setting Format for Depth Data Outpu
Page 35 and 36: Setting Output System Signal SYSTEM
Page 37 and 38: Panel Circuit Operation Check KEY U
Page 39 and 40: 5.3 Master Reset Executing Standard
Page 41 and 42: (3) Close the paper cover by pressi
Page 43 and 44: (1) Replacing Main Power Supply Fus
Page 45 and 46: 7. Installation When installing the
Page 47 and 48: Wall-Mounted Equipment Figure 3-2 7
Page 49 and 50: NKF-345 7. Installation 37
Page 51 and 52: 7.3 Connecting Components Notes: 1.
Page 53: 9. After-sales Service 9.1 When Req
Page 57 and 58: Actual Pictures Seabed Zero line DI
Page 59 and 60: Abrupt-Sloped Seabed Sidelobe False
Page 61 and 62: 7ZPNB0043 电子信息产品
show all

JFE-680

Create successful ePaper yourself

Delete template?

Save as template?