PRODUCT CATALOG

Recommendations

Info

PRECISEPOWER SUPPLIES Intelligent Motor Power Supplies PrecisePower Intelligent Motor Power Supplies interface to Guidance 3000/2000 controllers and provide the high voltage DC power required to drive a wide range of motors. Recommended for all users that require a high voltage motor power source. PrecisePower 2000 CONTROLLERS KEY FEATURES • Supply 165VDC to 340VDC depending upon AC input voltage • Integral relays for enabling and disabling motor power via commands from the controller • Large value output filter capacitors to store deceleration energy for use when power is needed • Automatic shut-down if switched to a short or severely over-loaded (PrecisePower 2000 only) • Ability to absorb line spikes • Built-in fuses PrecisePower 300 www.preciseautomation.com - Automate with Ease 25
PRECISEPOWER SPECIFICATIONS: CONTROLLERS General Specifications PRECISEPOWER 300 (PS1D-EA-00300) Range & Features PRECISEPOWER 2000 (PS10-EA-02000) Input voltage 90-264VAC Single phase 90-240VAC single phase or three phase Input frequency 50-60 Hz 50-60 Hz Input inrush current Input current at 240VAC single phase & 2000 DC watts output Output power Output voltage 6.8 A at 240 VAC in 6.7A at 240VAC input -- 12.4A RMS, 30A peak 300 watts RMS @ 120VAC 600 watts RMS @ 240VAC DC no load = (1.41 X VAC RMS input)– 2 Volts DC full load @ 300W = (DC no load) X 0.96 DC full load @ 600W = (DC no load) X 0.93 Nominal range of 167 VDC to 337 VDC % Regulation -- 5 to 7% Cat 3 No, single relay standard MAXIMUM 1000 Watts free air @ 240VAC single phase input 2000 Watts forced air @ 240VAC single phase input 2100 Watts forced air @ 208VAC 3 phase input 3400 Watts forced air @ 240VAC 3 phase input DC no load = (1.41 X VAC RMS phase-to-phase input) - 2 Volts DC full load single phase = (DC no load) X 0.93 DC full load three phase = (DC no load) X 0.97 Yes, when used with Precise Automation software and I2C communication, dual relay standard Fault detection -- Output short circuit, output overload, missing third AC phase Dimensions 135 mm x 76 mm x 60 mm 270 mm x 105 mm x 76 mm 26 Precise Automation - www.preciseautomation.com
Page 1 and 2: PRODUCT CATALOG
Page 3 and 4: TABLE OF CONTENTS Overview.........
Page 5 and 6: PRECISE ROBOTS Low cost, vision-gui
Page 7 and 8: PRECISE ROBOT SERIES ROBOTS PRECISE
Page 9 and 10: PRECISEPLACE 2000A DIMENSIONS: X St
Page 11 and 12: PRECISEFLEX 1000 ROBOTS AVAILABLE P
Page 13 and 14: PRECISEFLEX 1000 SPECIFICATIONS: RO
Page 15 and 16: GUIDANCE CONTROLLERS 4-axis vision-
Page 17 and 18: GUIDANCE CONTROLLER SERIES GUIDANCE
Page 19 and 20: GUIDANCE 3000A SPECIFICATIONS: CONT
Page 21 and 22: GUIDANCE 2000B SPECIFICATIONS: CONT
Page 23 and 24: GUIDANCE 2000C SPECIFICATIONS: CONT
Page 25 and 26: GUIDANCE 1000A SPECIFICATIONS: CONT
Page 27: Precise Manual Control Pendant (PP1
Page 31 and 32: AVAILABLE UPGRADES CONTROLLERS •
Page 33 and 34: AVAILABLE GUIDANCE SYSTEM CONFIGURA
Page 35 and 36: REMOTE IO (RIO) MODULE Additional I
Page 37 and 38: GUIDANCE DEVELOPMENT SUITE Developm
Page 39 and 40: DEVELOPER TOOLS GDE SCREENSHOT: PRO
Page 41 and 42: PRECISEVISION Powerful, easy-to-use
Page 43 and 44: AVAILABLE PRECISEVISION OPTIONS: PV
Page 45 and 46: SUPPORTED VISION HARDWARE Supported
Page 47 and 48: USB Cameras Camera Power PreciseVis
Page 49 and 50: GUIDANCE DISPENSE Dispensing softwa

PRODUCT CATALOG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?