PRODUCT CATALOG
PRODUCT CATALOG - Precise Automation
PRODUCT CATALOG - Precise Automation
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RIO MODULE SPECIFICATIONS:<br />
General Specifications<br />
Interface to Guidance Controller<br />
Communications interface<br />
Communications protocol<br />
Scanning rate<br />
Number of units<br />
Input and Output Interaces<br />
Ethernet port<br />
Serial ports<br />
Digital input channels<br />
Digital output channels<br />
Analog I/O channels<br />
Required Low Voltage Power<br />
Size<br />
Special Order Options<br />
Range & Features<br />
Interfaces via 10/100 Mbps Ethernet. Can be located anywhere within the local network of the Guidance Controller.<br />
Supports the MODBUS/TCP communications protocol. Uses a variation of this protocol to interface to Guidance<br />
Controllers. Protocol is compatible with all standard Ethernet TCP/IP networks. Can be configured as a slave to standard<br />
MODBUS/TCP masters (cannot communicate with Guidance Controller in this mode).<br />
Scanning rates for changes in inputs configurable. New input data sent to controller when values changed. New output<br />
data received from controller when values changed. Typical scanning rates are 5-10 milliseconds.<br />
Up to 4 RIO’s can be simultaneously interfaced to a Guidance Controller.<br />
Standard and enhanced RIO: One 10/100 Mbps Ethernet port<br />
Standard RIO: One RS-232 port with hardware flow control<br />
Enhanced RIO: Two RS-232 ports with hardware flow control, one RS-422/485 port<br />
32 optically isolated digital inputs<br />
Configurable in banks of 8 as sinking or sourcing<br />
5 VDC to 24 VDC for logic high if sinking<br />
24 VDC supplied for logic high if sourcing<br />
32 optically isolated digital outputs<br />
Must be purchased as sinking or sourcing<br />
24 VDC maximum pull up if sinking<br />
24 VDC supplied if sourcing<br />
100 mA maximum per channel<br />
Standard RIO: None<br />
Enhanced RIO: 4 analog input channels, +/- 10 VDC, 12 bit ADC<br />
24 VDC required for logic and input/output functions<br />
Standard RIO: 0.4A minimum for logic plus 3.2A maximum if sourcing all digital outputs for a total of 3.6A.<br />
Enhanced RIO: 0.4A minimum for logic plus 3.2A maximum if sourcing all digital outputs for a total of 3.6A.<br />
75 mm (W) x 195 mm (L) x 28 mm (H)<br />
Both the Enhanced RIO and sourcing output signals are special order items. As such, the lead time for these options can<br />
be quite long and minimum order quantity requirements apply.<br />
REMOTE IO<br />
www.preciseautomation.com - Automate with Ease 33
Change language