Broad Plate MC-DCP 4.5 mm Breitplatte MC-DCP 4.5 mm Plaque ...
Broad Plate MC-DCP 4.5 mm Breitplatte MC-DCP 4.5 mm Plaque ...
Broad Plate MC-DCP 4.5 mm Breitplatte MC-DCP 4.5 mm Plaque ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section of compression plates<br />
on femur and humerus<br />
<strong>Broad</strong> <strong>Plate</strong> <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
<strong>Breitplatte</strong> <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> large <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used for pseudarthrosis of the humerus and as a tension<br />
band plate for femoral fractures. Not for use on the tibia. The <strong>MC</strong>-<br />
<strong>DCP</strong> holes allow compression in both directions of the longitudinal<br />
axis.<br />
<strong>MC</strong>-<strong>DCP</strong>: Minimal contact dynamic compression plate.<br />
<strong>Plate</strong> details : Use broad plates with 6 or 7 holes in exceptional<br />
cases only on humerus.<br />
<strong>Plate</strong> thickness : 5.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.5 <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : All holes accept diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
The end hole can be used for diam. 6.5 <strong>mm</strong> cancellous screws. Under<br />
undercuts for vascular preservation.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832-1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832-3<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10345011006<br />
10345011007<br />
10345011008<br />
10345011009<br />
10345011010<br />
10345011011<br />
10345011012<br />
10345011013<br />
10345011014<br />
10345011015<br />
10345011016<br />
10345011017<br />
10345011018<br />
10345012006<br />
10345012007<br />
10345012008<br />
10345012009<br />
10345012010<br />
10345012011<br />
10345012012<br />
10345012013<br />
10345012014<br />
10345012015<br />
10345012016<br />
10345012017<br />
10345012018<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
106<br />
124<br />
142<br />
160<br />
178<br />
196<br />
214<br />
232<br />
250<br />
268<br />
286<br />
304<br />
322<br />
D-1
Section of compression plates<br />
on forearm, humerus and tibia<br />
Narrow <strong>Plate</strong> <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
Schmalplatte <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> étroite <strong>MC</strong>-<strong>DCP</strong> <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used as a neutralisation and tension band plate for<br />
fractures of forearm, humerus and tibia. Not for use on the femur.<br />
The <strong>MC</strong>-<strong>DCP</strong> holes allow compression in both directions of the<br />
longitudinal axis.<br />
<strong>MC</strong>-<strong>DCP</strong>: Minimal contact dynamic compression plate.<br />
<strong>Plate</strong> details : Use broad plates with 6 or 7 holes in exceptional<br />
cases only on humerus.<br />
<strong>Plate</strong> thickness : 4.6 <strong>mm</strong><br />
<strong>Plate</strong> width : 13.5 <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : All holes accept diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
The end hole can be used for diam. 6.5 <strong>mm</strong> cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832-1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832-3<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10346011002<br />
10346011003<br />
10346011004<br />
10346011005<br />
10346011006<br />
10346011007<br />
10346011008<br />
10346011009<br />
10346011010<br />
10346011011<br />
10346011012<br />
10346011013<br />
10346011014<br />
10346011015<br />
10346011016<br />
10346012002<br />
10346012003<br />
10346012004<br />
10346012005<br />
10346012006<br />
10346012007<br />
10346012008<br />
10346012009<br />
10346012010<br />
10346012011<br />
10346012012<br />
10346012013<br />
10346012014<br />
10346012015<br />
10346012016<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
34<br />
52<br />
70<br />
88<br />
106<br />
124<br />
142<br />
160<br />
178<br />
196<br />
214<br />
232<br />
250<br />
268<br />
286<br />
D-2
Section of compression plates<br />
on ulna and radius<br />
Narrow <strong>Plate</strong> <strong>MC</strong>-<strong>DCP</strong> 3.5 <strong>mm</strong><br />
Schmalplatte <strong>MC</strong>-<strong>DCP</strong> 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> étroite <strong>MC</strong>-<strong>DCP</strong> 3.5 <strong>mm</strong><br />
Indication : Used for smaller bones particularly ulna and radius.<br />
The <strong>MC</strong>-<strong>DCP</strong> holes allow compression in both directions of the<br />
longitudinal axis.<br />
<strong>MC</strong>-<strong>DCP</strong>: Minimal contact dynamic compression plate.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 4.0 x 11.0 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 4.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 11.0 <strong>mm</strong><br />
Hole spacing : 13.0 <strong>mm</strong><br />
Screws to be used : Fixation with 3.5 <strong>mm</strong> small cortical screws and<br />
4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832-3<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10346111004<br />
10346111005<br />
10346111006<br />
10346111007<br />
10346111008<br />
10346111009<br />
10346111010<br />
10346111011<br />
10346111012<br />
10346112004<br />
10346112005<br />
10346112006<br />
10346112007<br />
10346112008<br />
10346112009<br />
10346112010<br />
10346112011<br />
10346112012<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
51<br />
64<br />
77<br />
90<br />
103<br />
116<br />
129<br />
142<br />
155<br />
D-3
Section of plates for internal fixation following<br />
lengthening osteotomy for operation on femur<br />
<strong>Broad</strong> lengthening <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong> with 8 and 10 holes<br />
Breite Verlängerungsplatte <strong>4.5</strong> <strong>mm</strong> mit 8 und 10 Löcher<br />
<strong>Plaque</strong> d’allogement large <strong>4.5</strong> <strong>mm</strong> à 8 et 10 tours<br />
Indication : Used for the lengthening osteotomies of the femur. Slot<br />
for articulated tension device for distraction or compression.<br />
<strong>Plate</strong> details<br />
<strong>Plate</strong> thickness<br />
<strong>Plate</strong> width<br />
Hole spacing<br />
: <strong>Plate</strong> profile 16.0 <strong>mm</strong> x 5.0 <strong>mm</strong><br />
: 5.0 <strong>mm</strong><br />
: 16.0 <strong>mm</strong><br />
: 15.5 <strong>mm</strong> for 8 Holes<br />
1<strong>4.5</strong> <strong>mm</strong> for 10 Holes<br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> cortical screws. 6.5<br />
<strong>mm</strong> cancellous screw may also be used in the end holes. Slot for<br />
distraction or compression with articulated tension device.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Lengthening<br />
L1<br />
Holes<br />
Length<br />
L <strong>mm</strong><br />
10310011001<br />
10310011002<br />
10310011003<br />
10310011004<br />
40<br />
50<br />
60<br />
70<br />
8<br />
8<br />
8<br />
8<br />
145<br />
155<br />
165<br />
175<br />
10310021001<br />
10310021002<br />
10310021003<br />
10310021004<br />
40<br />
50<br />
60<br />
70<br />
10<br />
10<br />
10<br />
10<br />
170<br />
180<br />
190<br />
200<br />
D-4
Section of plates for internal fixation following<br />
lengthening osteotomy for operation on tibia<br />
Narrow lengthening <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong> with 8 and 10 holes<br />
Schmal Verlängerungsplatte <strong>4.5</strong> <strong>mm</strong> mit 8 und 10 Löcher<br />
<strong>Plaque</strong> d’allogement étroite <strong>4.5</strong> <strong>mm</strong> à 8 et 10 tours<br />
Indication : Used for the lengthening osteotomies of the tibia. Slot<br />
for articulated tension device for distraction or compression.<br />
<strong>Plate</strong> details<br />
<strong>Plate</strong> thickness<br />
<strong>Plate</strong> width<br />
Hole spacing<br />
: <strong>Plate</strong> profile 12.0 <strong>mm</strong> x 4.0 <strong>mm</strong><br />
: 4.0 <strong>mm</strong><br />
: 12.0 <strong>mm</strong><br />
: 15.5 <strong>mm</strong> for 8 Holes<br />
1<strong>4.5</strong> <strong>mm</strong> for 10 Holes<br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> cortical screws. 6.5<br />
<strong>mm</strong> cancellous screw may also be used in the end holes. Slot for<br />
distraction or compression with articulated tension device.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Lengthening<br />
L1<br />
Holes<br />
Length<br />
L <strong>mm</strong><br />
10309011001<br />
10309011002<br />
10309011003<br />
10309011004<br />
30<br />
40<br />
50<br />
60<br />
8<br />
8<br />
8<br />
8<br />
135<br />
145<br />
155<br />
165<br />
10309021001<br />
10309021002<br />
10309021003<br />
10309021004<br />
30<br />
40<br />
50<br />
60<br />
10<br />
10<br />
10<br />
10<br />
159<br />
169<br />
179<br />
189<br />
D-5
Section of compression plates for<br />
operation on femur and humerus<br />
<strong>Broad</strong> <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Breiteplatten <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> large <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used for pseudarthrosis of humerus and as a tension<br />
band plate for femoral fractures. Not for use on the tibia. Compression<br />
is achieved by use tension device.<br />
<strong>Plate</strong> details : Use plates with 6 or 7 holes in exceptional<br />
cases only on humerus.<br />
<strong>Plate</strong> thickness : 5.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : All holes accept diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
The end hole can be used for diam. 6.5 <strong>mm</strong> cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10302021002<br />
10302021003<br />
10302021004<br />
10302021005<br />
10302021006<br />
10302021007<br />
10302021008<br />
10302021009<br />
10302021010<br />
10302021011<br />
10302021012<br />
10302021013<br />
10302021014<br />
10302021015<br />
10302021016<br />
10302011002<br />
10302011003<br />
10302011004<br />
10302011005<br />
10302011006<br />
10302011007<br />
10302011008<br />
10302011009<br />
10302011010<br />
10302011011<br />
10302011012<br />
10302011013<br />
10302011014<br />
10302011015<br />
10302011016<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
71<br />
87<br />
103<br />
119<br />
135<br />
151<br />
167<br />
183<br />
199<br />
215<br />
231<br />
247<br />
263<br />
279<br />
295<br />
D-6
Section of compression plates for<br />
operation on tibia and humerus<br />
Narrow <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Schmaleplatten <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> étroite <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used as neutralization and tension band plates for<br />
fractures of forearm, humerus and tibia. Compression achieved<br />
through the use of the tension device.<br />
<strong>Plate</strong> details : Use plates with 2,3 or 4 holes in exceptional<br />
cases only.<br />
<strong>Plate</strong> thickness : 4.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 12.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : All holes accept diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
The end of holes are designed for cancellous bone screws. <strong>Plate</strong>s<br />
are slotted to accept a tension device.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10301021002<br />
10301021003<br />
10301021004<br />
10301021005<br />
10301021006<br />
10301021007<br />
10301021008<br />
10301021009<br />
10301021010<br />
10301021011<br />
10301021012<br />
10301021013<br />
10301021014<br />
10301021015<br />
10301021016<br />
10301011002<br />
10301011003<br />
10301011004<br />
10301011005<br />
10301011006<br />
10301011007<br />
10301011008<br />
10301011009<br />
10301011010<br />
10301011011<br />
10301011012<br />
10301011013<br />
10301011014<br />
10301011015<br />
10301011016<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
71<br />
87<br />
103<br />
119<br />
135<br />
151<br />
167<br />
183<br />
199<br />
215<br />
231<br />
247<br />
263<br />
279<br />
295<br />
D-7
Section of compression plates for<br />
operation on radius and cubitus<br />
Narrow plate 3.5 <strong>mm</strong><br />
Schmaleplatten 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> étroite 3.5 <strong>mm</strong><br />
Indication : Used for smaller bones particularly ulna and radius.<br />
Compression achieved through individual hole design, in which<br />
engagement between the spherical undersurface of screw head and<br />
sloping base of the elongated screw hole, creates relatively movement<br />
between bone and plate in the direction of the fracture site, so<br />
compressing the fracture. Compression can also be achieved using<br />
the tension device.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 11.0 x 2.50<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 11.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : All holes accept diam. 3.5 <strong>mm</strong> cortical screws<br />
and diam. 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10307041001<br />
10307041002<br />
10307041003<br />
10307041004<br />
10307041005<br />
10307041006<br />
10307041007<br />
10307041008<br />
10307041009<br />
10307041010<br />
10307041011<br />
10307051001<br />
10307051002<br />
10307051003<br />
10307051004<br />
10307051005<br />
10307051006<br />
10307051007<br />
10307051008<br />
10307051009<br />
10307051010<br />
10307051011<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
39<br />
55<br />
71<br />
87<br />
103<br />
119<br />
135<br />
151<br />
167<br />
183<br />
199<br />
2.50<br />
2.50<br />
11.00<br />
11.00<br />
D-8
Section of compression plates for<br />
operation on ulna and radius<br />
Small Fragment <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Kleinfragmentplatte 3.5 <strong>mm</strong><br />
Mini - plaque à compression 3.5 <strong>mm</strong><br />
Indication : Used for the treatment of smaller bones, particularly<br />
raius and cubitus. Compression is achieved through individual hole<br />
design, in which engagement between the spherical undersurface of<br />
the screw head and sloping base of elongated screw hole, creates<br />
relative movement between bone and plate in the direction of the<br />
fracture site, so compression can also achieved using the tension<br />
device.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 3.4 x 10.0 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 3.4 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Hole spacing : 12.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 3.5 <strong>mm</strong> small cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10331021001<br />
10331021002<br />
10331021003<br />
10331021004<br />
10331021005<br />
10331021006<br />
10331021007<br />
10331021008<br />
10331021009<br />
10331021010<br />
10331021011<br />
10331011001<br />
10331011002<br />
10331011003<br />
10331011004<br />
10331011005<br />
10331011006<br />
10331011007<br />
10331011008<br />
10331011009<br />
10331011010<br />
10331011011<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
25<br />
37<br />
49<br />
61<br />
73<br />
85<br />
97<br />
109<br />
121<br />
133<br />
145<br />
D-9
Section of plates for operation on<br />
forearm and fibula<br />
Semi-Tubular <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Halbrohrplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> demi-tube <strong>4.5</strong> <strong>mm</strong><br />
Indication : Primarly indicated for areas of low stress such as<br />
forearm-radius reco<strong>mm</strong>ended for the fractures of fibula. Compression<br />
is applied by eccentric positioning of the screw against the side of<br />
the screw hole furthest from the fracture line<br />
<strong>Plate</strong> details : Profile half of a 12.0 <strong>mm</strong> tube.<br />
<strong>Plate</strong> thickness : 1.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 11.7 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> cortical screws and<br />
diam. 6.5 <strong>mm</strong> cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
10308011001<br />
10308011002<br />
10308011003<br />
10308011004<br />
10308011005<br />
10308011006<br />
10308011007<br />
10308011008<br />
10308011009<br />
Holes<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
Length<br />
<strong>mm</strong><br />
39<br />
55<br />
71<br />
87<br />
103<br />
119<br />
135<br />
151<br />
167<br />
D-10
Section of plates for operation on fibula<br />
One-thirdTubular <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Drittelrohrplatte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> tiers de tube 3.5 <strong>mm</strong><br />
Indication : Used as buttress plate for fibula, metatarsals, and<br />
metacarpals bones. Compression is applied by eccentric positioning<br />
of the screw against the side of the screw hole furthest from the<br />
fracture line.<br />
<strong>Plate</strong> details : Profile one-third of a 12.0 <strong>mm</strong> tube<br />
<strong>Plate</strong> thickness : 1.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 9.0 <strong>mm</strong><br />
Hole spacing : 12.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam 3.5 <strong>mm</strong> small cortical screws<br />
and diam. 4.0 <strong>mm</strong> small cancellous screws. Compression effect can<br />
be achieved by eccentric insertion of distal screws from the fracture.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
10308031001<br />
10308031002<br />
10308031003<br />
10308031004<br />
10308031005<br />
10308031006<br />
10308031007<br />
10308031008<br />
10308031009<br />
10308031010<br />
10308031011<br />
Holes<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
Length<br />
<strong>mm</strong><br />
25<br />
37<br />
49<br />
61<br />
73<br />
85<br />
97<br />
109<br />
121<br />
133<br />
145<br />
D-11
Section of small plates for operation<br />
on hand, foot and maxillofacial surgery<br />
Mini Fragment plate 2.7 <strong>mm</strong><br />
Minifragmentplatte 2.7 <strong>mm</strong><br />
Mini - plaque à compression 2.7 <strong>mm</strong><br />
Indication : Used for maxillofacial surgery, hand and foot surgery.<br />
Compression is achieved through individual hole design, in which<br />
engagement between the spherical undersurface of the screw head<br />
and sloping base of elongated screw hole, creates relative movement<br />
between bone and plate in the direction of the fracture site, so<br />
compression can also achieved using the tension device.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 2.5 x 8.0 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 8.0 <strong>mm</strong><br />
Hole spacing : 8.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 2.7 <strong>mm</strong> mini cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
10331201004<br />
10331201005<br />
10331201006<br />
10331201007<br />
10331201008<br />
10331201009<br />
10331201010<br />
10331201011<br />
10331201012<br />
Holes<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
Length<br />
<strong>mm</strong><br />
36<br />
44<br />
52<br />
60<br />
68<br />
76<br />
84<br />
92<br />
100<br />
D-12
Section of reconstruction plates for<br />
operation on pelvis<br />
Sherman <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Sherman Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de Sherman <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used principally in the reconstruction of the pelvis. The<br />
design of these plates allows for three dimensional contouring. Due<br />
to their reduced stiffness, they should only be used for tension-band<br />
fixation or adaption.<br />
<strong>Plate</strong> details : Reconstruction plates <strong>4.5</strong> <strong>mm</strong> are manufactured<br />
from relatively soft material. Design and softness of the material<br />
enable three-dimensional contouring. Do not bend more than 15º<br />
between holes.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 11.0 <strong>mm</strong><br />
Hole spacing : 13.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> cortical screws and<br />
diam. 6.5 <strong>mm</strong> cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
Holes<br />
Lengthening<br />
L1 (<strong>mm</strong>)<br />
Length<br />
L (<strong>mm</strong>)<br />
10313001003<br />
10313001004<br />
10313001005<br />
10313001006<br />
10313001007<br />
10313001008<br />
10313001009<br />
10313001010<br />
10313001011<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
21<br />
21<br />
21<br />
21<br />
21<br />
21<br />
21<br />
21<br />
21<br />
58<br />
71<br />
84<br />
97<br />
110<br />
123<br />
136<br />
149<br />
162<br />
D-13
Section of reconstruction plates for<br />
operation on pelvis<br />
Reconstruction <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Rekonstrutionplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de reconstruction <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used principally in the reconstruction of the pelvis. The<br />
design of these plates allows for three dimensional contouring. Due<br />
to their reduced stiffness, they should only be used for tension-band<br />
fixation or adaption.<br />
<strong>Plate</strong> details : Reconstruction plates <strong>4.5</strong> <strong>mm</strong> are manufactured<br />
from relatively soft material. Design and softness of the material<br />
enable three-dimensional contouring. Do not bend more than 15º<br />
between holes.<br />
<strong>Plate</strong> thickness : 2.7 <strong>mm</strong><br />
<strong>Plate</strong> width : 12.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> cortical screws and<br />
diam. 6.5 <strong>mm</strong> cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10311011001<br />
10311011002<br />
10311011003<br />
10311011004<br />
10311011005<br />
10311011006<br />
10311011007<br />
10311011008<br />
10311011009<br />
10311011010<br />
10311011011<br />
10311011012<br />
10311011013<br />
10311011014<br />
10311011015<br />
10311011016<br />
10311011017<br />
10311012001<br />
10311012002<br />
10311012003<br />
10311012004<br />
10311012005<br />
10311012006<br />
10311012007<br />
10311012008<br />
10311012009<br />
10311012010<br />
10311012011<br />
10311012012<br />
10311012013<br />
10311012014<br />
10311012015<br />
10311012016<br />
10311012017<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
19<br />
20<br />
61<br />
77<br />
93<br />
109<br />
125<br />
141<br />
157<br />
173<br />
189<br />
205<br />
221<br />
237<br />
253<br />
269<br />
285<br />
301<br />
317<br />
D-14
Section of reconstruction plates for<br />
operation on pelvis<br />
Reconstruction <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong> curved<br />
Rekonstrutionplatte <strong>4.5</strong> <strong>mm</strong> gebogen<br />
<strong>Plaque</strong> de reconstruction <strong>4.5</strong> <strong>mm</strong><br />
pour le bassin<br />
Indication : Used principally in the reconstruction of the pelvis. It is<br />
slightly thicker than the straight pelvic reconstruction plate and prevent<br />
for the pelvic crest.<br />
<strong>Plate</strong> details : This plate has been especially designed for<br />
use on the pelvis. Material is thicker than straight reconstruction plate.<br />
<strong>Plate</strong> thickness : 2.7 <strong>mm</strong><br />
<strong>Plate</strong> width : 12.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam <strong>4.5</strong> <strong>mm</strong> small cortical screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10311061003<br />
10311061005<br />
10311061007<br />
10311061009<br />
10311061011<br />
10311061013<br />
10311061015<br />
10311062003<br />
10311062005<br />
10311062007<br />
10311062009<br />
10311062011<br />
10311062013<br />
10311062015<br />
6<br />
8<br />
10<br />
12<br />
14<br />
16<br />
18<br />
94<br />
126<br />
158<br />
190<br />
222<br />
254<br />
286<br />
D-15
Section of reconstruction plates for operation<br />
on pelvic, acetabular, clavicle and calcaneal<br />
Reconstruction <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Rekonstrutionplatte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> de reconstruction 3.5 <strong>mm</strong><br />
Indication : Used principally in the treatment of pelvic, clavicle and<br />
calcaneal fractures. The design of these plates allows for threedimentional<br />
contouring. Due to their reduced stiffness, they should<br />
be used only for cerclage or adaptations.<br />
<strong>Plate</strong> details : Reconstruction plates 3.5 <strong>mm</strong> are manufactured<br />
from relatively soft material. Design and softness of the material<br />
enable three-dimensional contouring. Do not bend more than 15º<br />
between holes.<br />
<strong>Plate</strong> thickness : 2.7 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Hole spacing : 12.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam 3.5 <strong>mm</strong> cortical screws and<br />
diam. 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10311021001<br />
10311021002<br />
10311021003<br />
10311021004<br />
10311021005<br />
10311021006<br />
10311021007<br />
10311021008<br />
10311021009<br />
10311021010<br />
10311021011<br />
10311021012<br />
10311021013<br />
10311021014<br />
10311021015<br />
10311021016<br />
10311021017<br />
10311022001<br />
10311022002<br />
10311022003<br />
10311022004<br />
10311022005<br />
10311022006<br />
10311022007<br />
10311022008<br />
10311022009<br />
10311022010<br />
10311022011<br />
10311022012<br />
10311022013<br />
10311022014<br />
10311022015<br />
10311022016<br />
10311022017<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
19<br />
20<br />
46<br />
58<br />
70<br />
82<br />
94<br />
106<br />
118<br />
130<br />
142<br />
154<br />
166<br />
178<br />
190<br />
202<br />
214<br />
226<br />
238<br />
D-16
Section of reconstruction plates for<br />
operation on pelvis<br />
Reconstruction <strong>Plate</strong> 3.5 <strong>mm</strong> curved<br />
Rekonstrutionplatte 3.5 <strong>mm</strong> gebogen<br />
<strong>Plaque</strong> de reconstruction 3.5 <strong>mm</strong><br />
pour le bassin<br />
Indication : Used principally in the reconstruction of the pelvis. It is<br />
slightly thicker than the straight pelvic reconstruction plate and prevent<br />
for the pelvic crest.<br />
<strong>Plate</strong> details : This plate has been especially designed for<br />
use on the pelvis. Material is thicker than straight reconstruction plate.<br />
<strong>Plate</strong> thickness : 2.7 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Hole spacing : 12.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam 3.5 <strong>mm</strong> small cortical screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10311041003<br />
10311041005<br />
10311041007<br />
10311041009<br />
10311041011<br />
10311041013<br />
10311041015<br />
10311042003<br />
10311042005<br />
10311042007<br />
10311042009<br />
10311042011<br />
10311042013<br />
10311042015<br />
6<br />
8<br />
10<br />
12<br />
14<br />
16<br />
18<br />
70<br />
94<br />
118<br />
142<br />
166<br />
190<br />
214<br />
D-17
Section of reconstruction plates for<br />
operation on madibular<br />
Reconstruction <strong>Plate</strong> 2.7 <strong>mm</strong><br />
Rekonstrutionplatte 2.7 <strong>mm</strong><br />
<strong>Plaque</strong> de reconstruction 2.7 <strong>mm</strong><br />
Indication : Indicate primarlly in co<strong>mm</strong>inuted fractures of smaller<br />
diameter bones specially used for mandibular reconstruction surgery.<br />
The design of these plates allows for three diamensional contouring.<br />
<strong>Plate</strong> details : Reconstruction plates 2.7 <strong>mm</strong> are manufactured<br />
from relatively soft material. Design and softness of the material<br />
enable three-dimensional contouring.<br />
<strong>Plate</strong> thickness : 2.7 <strong>mm</strong><br />
<strong>Plate</strong> width : 8.0 <strong>mm</strong><br />
Hole spacing : 8.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam 2.7 <strong>mm</strong> mini cortical screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10311031001<br />
10311031002<br />
10311031003<br />
10311031004<br />
10311031005<br />
10311031006<br />
10311031007<br />
10311031008<br />
10311031009<br />
10311031010<br />
10311031011<br />
10311031012<br />
10311031013<br />
10311031014<br />
10311031015<br />
10311031016<br />
10311031017<br />
10311031019<br />
10311031021<br />
10311032001<br />
10311032002<br />
10311032003<br />
10311032004<br />
10311032005<br />
10311032006<br />
10311032007<br />
10311032008<br />
10311032009<br />
10311032010<br />
10311032011<br />
10311032012<br />
10311032013<br />
10311032014<br />
10311032015<br />
10311032016<br />
10311032017<br />
10311032019<br />
10311032021<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
19<br />
20<br />
22<br />
24<br />
32<br />
40<br />
48<br />
56<br />
64<br />
72<br />
80<br />
88<br />
96<br />
104<br />
112<br />
120<br />
128<br />
136<br />
144<br />
152<br />
160<br />
176<br />
192<br />
D-18
Section of reconstruction plates for<br />
operation on distal humerus<br />
Y - Reconstruction <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Y - Rekonstrutionplatte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> de reconstruction<br />
en Y 3.5 <strong>mm</strong><br />
Indication : Used to treat co<strong>mm</strong>inuted fractures, particularly of the<br />
distal humerus. The design of these plates allows for three-dimensional<br />
contouring.<br />
<strong>Plate</strong> details : Y reconstruction plates are manufactured from<br />
relatively soft material. Design and softness of the material enable<br />
three-dimensional contouring. If necessary, the plate can be shortened<br />
by breaking or cutting. Adjustable in three-dimension with bending<br />
pliers.<br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 9.0 <strong>mm</strong><br />
Hole spacing : 12.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam 3.5 <strong>mm</strong> small cortical screws<br />
and 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136<br />
- ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Holes<br />
Shaft<br />
Total<br />
Holes<br />
10311051001 10311052001 4 4x4x4<br />
D-19
Section of humerus plates for<br />
operation on distal humerus<br />
Y - Fork <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Y - Gabelplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de fourchette<br />
en Y <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used to treat co<strong>mm</strong>inuted distal humerus intra-articular<br />
or extra-articular fractures. Depending on the fracture configuration<br />
like T or Y type, the plates are shaped to be placed according to the<br />
anatomy of proximal humerus. The pre-formed shape of the plate<br />
requires that a separate plate to be used for right and left humerus.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 2.5 <strong>mm</strong> x 16.0<strong>mm</strong><br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accepts diam. 6.5 <strong>mm</strong> cancellous<br />
screws. <strong>Plate</strong> shaft accepts diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
L <strong>mm</strong><br />
Length<br />
L1 <strong>mm</strong><br />
10325011001<br />
10325011003<br />
10325011006<br />
Right<br />
Right<br />
Right<br />
3<br />
5<br />
8<br />
88<br />
120<br />
168<br />
101<br />
133<br />
181<br />
10325021001<br />
10325021003<br />
10325021006<br />
Left<br />
Left<br />
Left<br />
3<br />
5<br />
8<br />
88<br />
120<br />
168<br />
101<br />
133<br />
181<br />
D-20
Section of humerus plates for<br />
operation on distal humerus<br />
Y - Distal Humerus <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Y - Distale Humerusplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour humerus distal<br />
en Y <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used to treat co<strong>mm</strong>inuted distal humerus intra-articular<br />
or extra-articular fractures. Depending on the fracture configuration<br />
like T or Y type, the plates are shaped to be placed according to the<br />
anatomy of proximal humerus. The pre-formed shape of the plate<br />
requires that a separate plate to be used for right and left humerus.<br />
It should be bend preoperatively to accurately match the counters of<br />
the segment of the bone to be fixed. And oval hole allows for temporary<br />
fixation of the plate prior to final adjustment and fixation.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 2.3 <strong>mm</strong> x 14.0<strong>mm</strong><br />
<strong>Plate</strong> thickness : 2.3 <strong>mm</strong><br />
<strong>Plate</strong> width : 14.0 <strong>mm</strong><br />
Hole spacing : 17.0 <strong>mm</strong><br />
Screws to be used : Head of plate accepts diam. 6.5 <strong>mm</strong> cancellous<br />
screws. <strong>Plate</strong> shaft accepts diam. <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10320011001<br />
10320011002<br />
10320011003<br />
10320011005<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
6<br />
7<br />
9<br />
137<br />
150<br />
167<br />
201<br />
10320021001<br />
10320021002<br />
10320021003<br />
10320021005<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
6<br />
7<br />
9<br />
137<br />
150<br />
167<br />
201<br />
D-21
Section of humerus plates for<br />
operation on distal humerus<br />
Epicondylar <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Epi-kondylenplatte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> type lecestre 3.5 <strong>mm</strong><br />
Indication : The epicondylar humerus plates have been designed<br />
to be used for the distal fractures of humerus. Particularly can be<br />
indicate for multi-fragmented fracture of distal humerus joint, according<br />
to the anatomy of medial and lateral epicondyle. The pre-formed<br />
shape of the plate requires that a separete plate to be used for right<br />
and left distal humerus.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 0.8 <strong>mm</strong> x 11.5<strong>mm</strong><br />
<strong>Plate</strong> thickness : 0.8 <strong>mm</strong><br />
<strong>Plate</strong> width : 11.5 <strong>mm</strong><br />
Hole spacing : 14.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 3.5 <strong>mm</strong> small cortical screws<br />
and 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10340011005<br />
10340011001<br />
10340011002<br />
10340011003<br />
10340011004<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
92<br />
120<br />
148<br />
176<br />
204<br />
Left<br />
10340021005<br />
10340021001<br />
10340021002<br />
10340021003<br />
10340021004<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
92<br />
120<br />
148<br />
176<br />
204<br />
Right<br />
D-22
Section of support plates for<br />
operation on humerus<br />
T - Humerus <strong>Plate</strong> 3.5 <strong>mm</strong><br />
T - Humerus Platte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> pour humerus en T 3.5 <strong>mm</strong><br />
Indication : The humerus T plates have been designed<br />
to be used for proximal humerus fractures. Design for<br />
both left and right side. The varius configuration of T plate<br />
allow for anatomic reduction and alternative screw placement.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 2.5 x 16.0 <strong>mm</strong>. Anatomical<br />
shaping pre-contoured for left and right variations. Also eleminates<br />
manual contouring, simplifying and reducing opperative time and<br />
reduces the incidence of bending stress patterns and subsequent<br />
weaknesses in plate. <strong>Plate</strong> head with radius.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 45.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 4.0 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts 3.5 <strong>mm</strong> small cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10323041001<br />
10323041002<br />
10323041003<br />
10323041004<br />
10323041005<br />
10323041006<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
68.50<br />
8<strong>4.5</strong>0<br />
100.50<br />
116.50<br />
132.50<br />
148.50<br />
10323051001<br />
10323051002<br />
10323051003<br />
10323051004<br />
10323051005<br />
10323051006<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
68.50<br />
8<strong>4.5</strong>0<br />
100.50<br />
116.50<br />
132.50<br />
148.50<br />
D-23
Section of support plates for<br />
operation on humerus<br />
Proximal Humerus <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Proximale Humerus Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour proximal humerus <strong>4.5</strong> <strong>mm</strong><br />
Indication : The proximal humerus plates have been designed to<br />
be used for proximal humerus fractures. Particularly the shape of this<br />
plate permit a stable fixation of two part surgical neck fracture. Head<br />
of plate with left and right variation allow anatomic reduction and<br />
alternative screw placement.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 3.0 x 17.0 <strong>mm</strong>. Anatomical shaping<br />
pre-contoured for left and right variations. Also eleminates manual<br />
contouring, simplifying and reducing opperative time and reduces the<br />
incidence of bending stress patterns and subsequent weaknesses<br />
in plate.<br />
<strong>Plate</strong> thickness : 3.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.0 <strong>mm</strong><br />
Head width : 2<strong>4.5</strong> <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
2<strong>4.5</strong>0<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10321011001<br />
10321011002<br />
10321011003<br />
Right<br />
Right<br />
Right<br />
5<br />
6<br />
7<br />
80<br />
98<br />
116<br />
10321021001<br />
10321021002<br />
10321021003<br />
Left<br />
Left<br />
Left<br />
5<br />
6<br />
7<br />
80<br />
98<br />
116<br />
Left<br />
Right<br />
D-24
Section of support plates for<br />
operation on tibia<br />
Spoon <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Löffelplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong>-cuillère <strong>4.5</strong> <strong>mm</strong><br />
Indication : The spoon plate is a buttress plate designed to sit on<br />
the anterior crest of the tibia. It is primarly indicated for pilon fractures<br />
that have extensive anterior crushing but good posture support.It is<br />
also used in the treatment of metaphyseal non-unions of distal tibia<br />
and the distal humerus. It should be bent pre-operative to accurately<br />
match the contours of the segment of bone to be fixed. An oval hole<br />
allows for temporary fixation of the plate prior to final adjustment and<br />
fixation.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre. Shaft with V-profile for the fixation on frontal edge<br />
of tibia.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 15.3 <strong>mm</strong><br />
Head width : 33.0 <strong>mm</strong><br />
Profile high : 6.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
10326021001<br />
10326021002<br />
Holes<br />
5<br />
6<br />
Length<br />
<strong>mm</strong><br />
100<br />
120<br />
D-25
Section of support plates for operation<br />
on tibia and humerus<br />
T - <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
T - Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> en T <strong>4.5</strong> <strong>mm</strong><br />
Indication : The T plate is primarly used as a<br />
buttress plate for medial tibial plateau. It is also<br />
used in the distal tibia, medial distal femur and A3<br />
fractures of proximal humerus. It is relatively thin and<br />
consequently not as strong as standard self compressing<br />
plate. It is designed to be used as a buttress plate in areas<br />
of thin metaphyseal cortical bone or to prevent the collapsing<br />
of any cancellous defects in that area. It should be bent preoperative<br />
to accurately match the counters of the segment of bone<br />
to be fixed. An oval hole allows for temporary fixation of the plate<br />
prior to final adjustment and fixation.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 34.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
10323011001<br />
10323011002<br />
10323011003<br />
10323011004<br />
10323011005<br />
10323011006<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Length<br />
<strong>mm</strong><br />
68<br />
84<br />
100<br />
116<br />
132<br />
148<br />
D-26
Section of support plates for<br />
operation on tibia<br />
T - Buttress <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
T - Abstützplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de soutien en T <strong>4.5</strong> <strong>mm</strong><br />
Indication : The T buttress plate is an adaptation<br />
of a standard T plate. All holes configurations and<br />
plate dimensions are similar to that of the standard<br />
T plate.The profile has been altered to a double bend,<br />
allowing the plate to fit the lateral plateau of the tibia. It<br />
is designed to be used as a buttress plate in areas of thin<br />
metaphyseal cortical bone or to prevent the collapsing of any<br />
cancellous defects in that area. It should be bent pre-operative<br />
to accurately match the counters of the segment of bone to be fixed.<br />
An oval hole allows for temporary fixation of the plate prior to final<br />
adjustment and fixation.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 34.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
10323021001<br />
10323021002<br />
10323021003<br />
10323021004<br />
10323021005<br />
10323021006<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Length<br />
<strong>mm</strong><br />
68<br />
84<br />
100<br />
116<br />
132<br />
148<br />
D-27
Section of support plates for<br />
operation on tibia<br />
L - <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
L - Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> en L <strong>4.5</strong> <strong>mm</strong><br />
Indication : The L plate is an adaptation of a<br />
standard T plate. All holes configurations and plate<br />
dimensions are similar to that of the standard T plate, but<br />
the head of the plate is shifted either left or right to allow<br />
for alternative screw placement. Recomended for treatment<br />
of tibial head fractures.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre.<br />
<strong>Plate</strong> thickness : 2.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 26.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10324031003<br />
10324031004<br />
10324031005<br />
10324031006<br />
10324031007<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
4<br />
5<br />
6<br />
7<br />
8<br />
84<br />
100<br />
116<br />
132<br />
148<br />
Left<br />
10324041003<br />
10324041004<br />
10324041005<br />
10324041006<br />
10324041007<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
4 84<br />
5 100<br />
6 116<br />
7 132<br />
8 148<br />
Right<br />
D-28
Section of support plates for<br />
operation on tibia<br />
L-Buttress <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
L-Abstützplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de soutien en L <strong>4.5</strong> <strong>mm</strong><br />
Indication : The L buttress plate is an adaptation of a<br />
standard T buttress plate. All holes configurations and plate<br />
dimensions are similar to that of the standard T buttress plate,<br />
but the head of the plate is shifted either left or right to allow<br />
for alternative screw placement. The double bend profile allows<br />
fixation on the lateral side of the tibia plateau. Recomended for<br />
treatment of tibial head fractures.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre.<br />
<strong>Plate</strong> thickness : 2.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 15.5 <strong>mm</strong><br />
Head width : 33.2 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10324071002<br />
10324071003<br />
10324071004<br />
10324071005<br />
10324071006<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
4<br />
5<br />
6<br />
7<br />
8<br />
87<br />
103<br />
119<br />
135<br />
151<br />
10324081002<br />
10324081003<br />
10324081004<br />
10324081005<br />
10324081006<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
4<br />
5<br />
6<br />
7<br />
8<br />
87<br />
103<br />
119<br />
135<br />
151<br />
D-29
Section of support plates for<br />
operation on distal tibia<br />
Cloverleaf <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Kleeblattplatte 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> en trèfle 3.5 <strong>mm</strong><br />
Indication : The cloverleaf plate is a buttress<br />
plate designed to sit on the medial aspect of the distal<br />
tibia. It is thin and can be easily cut. The plate has a frontal<br />
wing which allows fixation to the medial malleous. The plate can<br />
also be modified by having this frontal wing cut of which allows it use<br />
on the anterior plane of distal tibia. It should be bend pre-operatively<br />
to accurately match the contours of the segment of the bone to be<br />
fixed. And oval hole allows for temporary fixation of the plate prior to<br />
final adjustment and fixation.<br />
<strong>Plate</strong> details : <strong>Plate</strong> is contoured during manufacture to<br />
approximate the eventual fracture site, allowing fine adjustment to<br />
be made in theatre.<br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 42.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 4.0 <strong>mm</strong> small cancellous<br />
screws. <strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
10327001001<br />
10327001002<br />
10327001003<br />
10327001004<br />
10327001005<br />
10327001006<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
Length<br />
<strong>mm</strong><br />
88<br />
104<br />
120<br />
136<br />
152<br />
168<br />
D-30
Section of small fragment plates for<br />
operation on distal - radius<br />
Small T - <strong>Plate</strong>, 3.5 <strong>mm</strong><br />
Schmal T - Platte, 3.5 <strong>mm</strong><br />
Petite-plaque en T 3.5 <strong>mm</strong><br />
Indication : Used to treat distal radius fractures. Designed<br />
for both left and right side. The various configurations of T-plate<br />
allow for anatomic reduction.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 1.5 <strong>mm</strong> x 10.0 <strong>mm</strong>. Shaft of plate<br />
with radius. Head of plate 3 holes, right angle 10º without radius.<br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Head width : 23.0 <strong>mm</strong><br />
Hole spacing : 11.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 3.5 <strong>mm</strong> small cortical screws<br />
and 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
Style<br />
10323131002<br />
10323131003<br />
10323131004<br />
10323131005<br />
3<br />
4<br />
5<br />
6<br />
52<br />
63<br />
74<br />
85<br />
Right<br />
Right<br />
Right<br />
Right<br />
10323141002<br />
10323141003<br />
10323141004<br />
10323141005<br />
3<br />
4<br />
5<br />
6<br />
52<br />
63<br />
74<br />
85<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
Right<br />
D-31
Section of small fragment plates for<br />
operation on distal - radius<br />
Small T - <strong>Plate</strong>, oblique 3.5 <strong>mm</strong><br />
Schmal T - Platte, schragwinklig 3.5 <strong>mm</strong><br />
Petite-plaque en T à angle oblique 3.5 <strong>mm</strong><br />
Indication : Used to treat distal radius fractures. Designed for both<br />
left and right side. The various configurations of T-plate allow for<br />
anatomic reduction.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 1.5 <strong>mm</strong> x 10.0 <strong>mm</strong>. Shaft of plate<br />
with radius. Head of plate 3 holes, right angle 10º without radius.<br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Head width : 25.0 <strong>mm</strong><br />
Hole spacing : 10.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 3.5 <strong>mm</strong> small cortical screws<br />
and 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
10323151003<br />
10323151004<br />
10323151005<br />
10323151006<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
Length<br />
L <strong>mm</strong><br />
52<br />
62<br />
72<br />
82<br />
D-32
Section of small fragment plates<br />
for operation on distal radius<br />
Small T-plate 3.5 <strong>mm</strong> straight<br />
Schmal T-Platte 3.5 <strong>mm</strong> gerade<br />
Petite-plaque en T droite<br />
Indication : Used to treat distal radius fractures. It can be used for<br />
left and right radius. The varius configurations of T-plate allow for<br />
anatomic reduction.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 1.5 x 10.0 <strong>mm</strong>.<br />
Shaft of plate with radius.<br />
Head of plate 4 holes with radius-straight.<br />
<strong>Plate</strong> thickness<br />
<strong>Plate</strong> width<br />
Head width<br />
Hole spacing<br />
: 1.3 <strong>mm</strong><br />
: 10.0 <strong>mm</strong><br />
: 31.0 <strong>mm</strong><br />
: 11.0 <strong>mm</strong><br />
Screws to be used : Fixation with 3.5 <strong>mm</strong> small cortical screws and<br />
4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
: Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Holes Length<br />
<strong>mm</strong><br />
10323171003<br />
10323171004<br />
10323171005<br />
10323171006<br />
3<br />
4<br />
5<br />
6<br />
45<br />
56<br />
67<br />
78<br />
Small T-plate 3.5 <strong>mm</strong> straight<br />
Schmal T-Platte 3.5 <strong>mm</strong> gerade<br />
Petite-plaque en T droite<br />
Indication : Used to treat distal radius fractures. It can be used for<br />
left and right radius. The varius configurations of T-plate allow for<br />
anatomic reduction. configurations of T-plate allow for anatomic<br />
reduction.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 1.5 x 10.0 <strong>mm</strong>.<br />
Shaft of plate with radius.<br />
Head of plate 3 holes without radius-straight.<br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Head width<br />
Hole spacing<br />
: 21.0 <strong>mm</strong><br />
: 11.0 <strong>mm</strong><br />
Screws to be used : Fixation with 3.5 <strong>mm</strong> small cortical<br />
screws and 4.0 <strong>mm</strong> small cancellous screws.<br />
Material<br />
: Certified Stainless Steel<br />
according to ASTM F.138 - ISO 5832/1.<br />
D-33<br />
Ref. Number<br />
Stainless Steel<br />
10323091002<br />
10323091003<br />
10323091004<br />
10323091005<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
Length<br />
L <strong>mm</strong><br />
45<br />
56<br />
67<br />
78
Section of small fragment plates<br />
for operation on hand surgery<br />
Small L and T <strong>Plate</strong> 2.7 <strong>mm</strong><br />
Schmal L und T <strong>Plate</strong> 2.7 <strong>mm</strong><br />
Petite-plaque en L et T 2.7 <strong>mm</strong><br />
Indication : To be used in stabilising for head of interfalangeal<br />
articulation of hand. <strong>Plate</strong>s are slightly concave with right, left<br />
and oblique (T-shaped) end hole style.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 1.0 <strong>mm</strong> x 7.0 <strong>mm</strong>.<br />
<strong>Plate</strong> thickness : 1.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 5.5<strong>mm</strong> for T- <strong>Plate</strong>, 7.0 <strong>mm</strong> for L-<strong>Plate</strong><br />
Hole spacing : 8.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 2.7 <strong>mm</strong> mini cortical screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Available in titanium according to ASTM F.136<br />
ISO 5832/3.<br />
Ref. Number Ref. Number Description Holes Length Style<br />
Stainless Steel Titanium<br />
L <strong>mm</strong><br />
10323031002<br />
10323031003<br />
10323032002<br />
10323032003<br />
T - <strong>Plate</strong><br />
T - <strong>Plate</strong><br />
3<br />
4<br />
32.0<br />
40.0<br />
10324011006<br />
10324021006<br />
10324012006<br />
10324022006<br />
L - <strong>Plate</strong> 90º<br />
L - <strong>Plate</strong> 90º<br />
3<br />
3<br />
32.0<br />
32.0<br />
Right<br />
Left<br />
10324051001<br />
10324061001<br />
10324052001<br />
10324062001<br />
L - <strong>Plate</strong> 105º<br />
L - <strong>Plate</strong> 105º<br />
3<br />
3<br />
3<strong>4.5</strong><br />
3<strong>4.5</strong><br />
Right<br />
Left<br />
105º 90º<br />
Mini L and T <strong>Plate</strong> 2.0 <strong>mm</strong><br />
Mini L und T <strong>Plate</strong> 2.0 <strong>mm</strong><br />
Mini-plaque en L et T 2.0 <strong>mm</strong><br />
Indication : To be used in fixation of fractures in small bones primarly<br />
for finger joint head and foot.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 1.0 <strong>mm</strong> x 5.0 <strong>mm</strong>.<br />
<strong>Plate</strong> thickness : 1.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 5.0 <strong>mm</strong><br />
Hole spacing : 6.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 2.0 <strong>mm</strong> mini cortical screws.<br />
11.0<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Available in titanium according to ASTM F.136<br />
ISO 5832/3.<br />
Ref. Number<br />
Stainless Steel<br />
Ref. Number<br />
Titanium<br />
Description Holes Style<br />
11.0<br />
18<br />
11.0<br />
10323231002<br />
10323232002<br />
T - <strong>Plate</strong><br />
2<br />
10324151002<br />
10324151102<br />
10324152002<br />
10324152102<br />
L - <strong>Plate</strong> 90º<br />
L - <strong>Plate</strong> 90º<br />
2<br />
2<br />
Right<br />
Left<br />
18<br />
18<br />
10324161002<br />
10324161102<br />
10324162002<br />
10324162102<br />
L - <strong>Plate</strong> 110º<br />
L - <strong>Plate</strong> 110º<br />
2<br />
2<br />
Right<br />
Left<br />
110º 90º<br />
D-34
Section of small plates for operation<br />
on hand, foot and maxillofacial surgery<br />
Quarter Tubular plate 2.7 <strong>mm</strong><br />
Viertelrohrplatte 2.7 <strong>mm</strong><br />
<strong>Plaque</strong> quart de tube 2.7 <strong>mm</strong><br />
Indication : Used to treat small bone fractures, e.g metatarsals and<br />
metacarpals. Compression is applied by eccentric positioning of the<br />
screw against the side of the screw hole furthest from the fracture<br />
line.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile one quarter of 12 <strong>mm</strong> diam. tube.<br />
<strong>Plate</strong> thickness : 1.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 7.5 <strong>mm</strong><br />
Hole spacing : 8.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 2.7 <strong>mm</strong> mini cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
10308041002<br />
10308041003<br />
10308041004<br />
10308041005<br />
10308041006<br />
10308041007<br />
10308041008<br />
10308041009<br />
Holes<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
Length<br />
<strong>mm</strong><br />
23<br />
31<br />
39<br />
47<br />
55<br />
63<br />
71<br />
79<br />
D-35
Section of cervicale plates for operation<br />
on cervicale vertebrae<br />
Cervical Straight <strong>Plate</strong> 3.5 <strong>mm</strong><br />
Halswirbelplatte gerade 3.5 <strong>mm</strong><br />
<strong>Plaque</strong> droties pour cervicales 3.5 <strong>mm</strong><br />
Indication : Used for stabilisation and somatoarthrodesis in anterior<br />
surgery of the cervical.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 4.0 <strong>mm</strong> x 10.0 <strong>mm</strong>.<br />
<strong>Plate</strong> thickness : 4.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Hole spacing : 13.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 3.5 <strong>mm</strong> small cortical and<br />
4.0 <strong>mm</strong> small cancellous screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Available in titanium according to ASTM F.136<br />
ISO 5832/3.<br />
Ref. Number Holes Length R Tickness<br />
Stainless Steel<br />
L <strong>mm</strong><br />
A <strong>mm</strong><br />
10101411023<br />
10101411036<br />
10101411049<br />
10101411062<br />
10101411101<br />
10101411127<br />
2<br />
3<br />
4<br />
5<br />
8<br />
10<br />
23.0<br />
36.5<br />
49.5<br />
62.0<br />
101.0<br />
127.0<br />
-------<br />
R270<br />
R130<br />
R130<br />
R300<br />
R300<br />
4<br />
4<br />
4<br />
4<br />
4<br />
4<br />
Cervical Spine H - <strong>Plate</strong> 2.7 <strong>mm</strong><br />
Halswibel - H Platte 2.7 <strong>mm</strong><br />
<strong>Plaque</strong> en H pour cervicales 2.7 <strong>mm</strong><br />
Indication : The cervical spine H plate is principally used for spine<br />
arthrodeses also for calcaneus.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile with radius 1.5 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 1.5 <strong>mm</strong><br />
<strong>Plate</strong> width : 19.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. 2.7 <strong>mm</strong> mini cortical and<br />
3.5 <strong>mm</strong> small corticale screws.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1. Available in titanium according to ASTM F.136<br />
ISO 5832/3.<br />
Ref. Number Holes Length Length<br />
Stainless Steel<br />
<strong>mm</strong> L <strong>mm</strong><br />
10101421023<br />
10101421025<br />
10101421028<br />
10101421041<br />
10101421046<br />
10101421059<br />
5<br />
5<br />
5<br />
8<br />
8<br />
11<br />
16<br />
18<br />
21<br />
16+18<br />
18+21<br />
16+18+18<br />
23<br />
25<br />
28<br />
41<br />
46<br />
59<br />
D-36
Section of cervicale plates for operation<br />
on dorsal and lumbar spine<br />
Dorsal and Lumbar Spine <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Dorso - lumbar Wirbelsäulenplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour dorso-lombaires <strong>4.5</strong> <strong>mm</strong><br />
Indication : The desing of the posterior plates comes from spine<br />
anatomy. The average distance between two adjacent pedicles is 26<br />
<strong>mm</strong>. The plates are created with holes every 13 <strong>mm</strong>. It is therefore<br />
possible to fix two adjacent vertebrae with a pedicular screw every<br />
two holes. The plates are curved similar to the normal spine at<br />
thoracolumbar juction, which is the most co<strong>mm</strong>on site of fracture.<br />
The holes are reinforced by an embossment giving to the plates and<br />
homogeneous resistance. They are produced from stainless steel.<br />
These plates can be bend if necessary. Different lenghts, ranging<br />
from 49 <strong>mm</strong> to 218 <strong>mm</strong> with 4 to 17 holes have been designed.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 7.2 x 10.0 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 7.2 <strong>mm</strong><br />
<strong>Plate</strong> width : 10.0 <strong>mm</strong><br />
Hole spacing : 13.0 <strong>mm</strong><br />
Screws to be used : Fixation with diam. <strong>4.5</strong> <strong>mm</strong> cortical and 3.5<br />
<strong>mm</strong> small cortical screws.<br />
Material<br />
F.138 - ISO 5832/1.<br />
: Certified Stainless Steel according to ASTM<br />
Ref. Number<br />
Stainless Steel<br />
10101431004<br />
10101431005<br />
10101431007<br />
10101431009<br />
10101431011<br />
10101431013<br />
10101431015<br />
10101431017<br />
Holes<br />
4<br />
5<br />
7<br />
9<br />
11<br />
13<br />
15<br />
17<br />
Length<br />
<strong>mm</strong><br />
49<br />
62<br />
88<br />
114<br />
140<br />
166<br />
192<br />
218<br />
D-37
Section of support plates for<br />
operation on hip arthrodesis<br />
Cobra Head <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Kreuzplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> à croix <strong>4.5</strong> <strong>mm</strong><br />
Indication : Used when an arthrodesis of the hip is to<br />
be performed. 6.5 <strong>mm</strong> cancellous screws are used<br />
through the proximal fixation holes into the femoral<br />
head. The plate is then secured to the femoral shaft<br />
with <strong>4.5</strong> <strong>mm</strong> cortical screws.<br />
<strong>Plate</strong> details : The cobra head plates are manufactured from<br />
relatively thicker material than the other standard plates. Design and<br />
hardness of this plate allows secure fixation.<br />
<strong>Plate</strong> thickness : 6.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 40.0 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. Cancellous screws are<br />
recomended for the head of the plate.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10328021002<br />
10328021003<br />
10328021004<br />
10328021005<br />
10328021006<br />
10328021007<br />
10328021008<br />
10328021009<br />
10328011002<br />
10328011003<br />
10328011004<br />
10328011005<br />
10328011006<br />
10328011007<br />
10328011008<br />
10328011009<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
136<br />
152<br />
168<br />
184<br />
200<br />
216<br />
232<br />
248<br />
D-38
Section of support plates for<br />
operation on femoral condyle<br />
Condylar Buttress <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Kondylenabstützplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de soutien condyliennes <strong>4.5</strong> <strong>mm</strong><br />
Indication : The condylar buttress plate have<br />
been designed to be used for the fractures of<br />
distal femur. They come in a right and a left version.<br />
They are heavier and stronger than all other buttress<br />
plates since they have to witstand much greater forces.<br />
<strong>Plate</strong> details : The condylar buttress plates are manufactured<br />
from relatively thicker material than the other standard plates. Design<br />
and hardness of this plate allows secure fixation.<br />
<strong>Plate</strong> thickness : 5.00 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.00 <strong>mm</strong><br />
Head width : 48.25 <strong>mm</strong><br />
Hole spacing : 16.00 <strong>mm</strong> to shaft<br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. Cancellous screws are<br />
recomended for the head of the plate.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Ref. Number<br />
Round Holes<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10329021004<br />
10329021005<br />
10329021006<br />
10329021007<br />
10329021008<br />
10329021009<br />
10329021010<br />
10329011004<br />
10329011005<br />
10329011006<br />
10329011007<br />
10329011008<br />
10329011009<br />
10329011010<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
158<br />
174<br />
190<br />
206<br />
222<br />
238<br />
254<br />
10329021024<br />
10329021025<br />
10329021026<br />
10329021027<br />
10329021028<br />
10329021029<br />
10329021030<br />
10329011024<br />
10329011025<br />
10329011026<br />
10329011027<br />
10329011028<br />
10329011029<br />
10329011030<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
158<br />
174<br />
190<br />
206<br />
222<br />
238<br />
254<br />
D-39
Section of support plates for<br />
operation on lateral tibia<br />
Lateral Tibial Head Buttress <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Laterale Tibiakopfabstützplatte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> de soutien latérale pour<br />
plateau tibial <strong>4.5</strong> <strong>mm</strong><br />
Indication : The lateral tibial head plate is designed as a buttress<br />
plate of the lateral tibial plateau. Avaliable with various holes. The<br />
head of this plate is shifted either left or right to allows for alternative<br />
screws placement.<br />
<strong>Plate</strong> details : <strong>Plate</strong> profile 145.<strong>mm</strong> x 4.0 <strong>mm</strong><br />
<strong>Plate</strong> thickness : 5.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 14.0 <strong>mm</strong><br />
Head width : 23.6 <strong>mm</strong><br />
Hole spacing : 16.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. Shaft with <strong>DCP</strong> dynamic<br />
compression holes and slots for tension device .<br />
Right angle plate for left leg.<br />
Left angle plate for right leg.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
<strong>DCP</strong> Holes<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10316111005<br />
10316111007<br />
10316111009<br />
10316111011<br />
10316111013<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
123<br />
155<br />
187<br />
219<br />
251<br />
10316121005<br />
10316121007<br />
10316121009<br />
10316121011<br />
10316121013<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
123<br />
155<br />
187<br />
219<br />
251<br />
D-40
Section of anatomical bone plates for<br />
operation on distal tibia<br />
Distal Tibia <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Distale Tibia Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour tibia distal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical distal tibia bone plates are designed to be<br />
used for reducing fractures of the distal tibia.It is designed to sit on<br />
the distal aspect of the tibia The anatomical bone plate features show<br />
the following important factors to osteosynthesis as; permit a stable<br />
fixation of the small proximal and distal fragments. They consider the<br />
various physiological stability factors of distal spongiosa and metato<br />
diaphyseal fractures. They are curved and twisted to conform to<br />
the nature shape of the proximal and distal bones areas. They simplify<br />
reduction in case of extended fractures as their anterior surface is<br />
contoured to minimize tissue irritation.<br />
<strong>Plate</strong> details : To conform to the ventro-tibial contours of the<br />
distal tibia, the plate is twisted and curved an has a concav surface<br />
on its bone side and broadened distal end. The pre-form shape of<br />
the plate requires that a separate plate to be used for right and left<br />
tibia.<br />
<strong>Plate</strong> thickness : 3.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.0 <strong>mm</strong><br />
Head width : 2<strong>4.5</strong> <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10314011001<br />
10314011003<br />
10314011005<br />
10314011007<br />
10314011009<br />
10314011011<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
15<br />
86<br />
122<br />
158<br />
194<br />
230<br />
266<br />
10314021001<br />
10314021003<br />
10314021005<br />
10314021007<br />
10314021009<br />
10314021011<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
15<br />
86<br />
122<br />
158<br />
194<br />
230<br />
266<br />
D-41
Section of anatomical bone plates for<br />
operation on proximal tibia<br />
Lateral Proximal Tibia <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Laterale - Proximale Tibia Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour tibia latérale proximal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical lateral proximal tibia bone plates are designed<br />
to be used for reducing fractures of the proximal tibia. These plates<br />
are indicated where the shape of the fracture or the soft tissue<br />
problems do not make plate attachment to the medial tibial surface<br />
advisable.It is designed to sit on the lateral aspect of the proximal<br />
tibia. The anatomical bone plate features show the following important<br />
factors to osteosynthesis as; permit a stable fixation of the small<br />
proximal and distal fragments. They consider the various physiological<br />
stability factors of distal spongiosa and meta-to diaphyseal fractures.<br />
They are curved and twisted to conform to the nature shape of the<br />
proximal and distal bones areas. They simplify reduction in case of<br />
extended fractures as their anterior surface is contoured to minimize<br />
tissue irritation.<br />
<strong>Plate</strong> details : To conform to the ventro-tibial contours of the<br />
proximal tibia, the plate is twisted and curved an has a concav surface<br />
on its bone side and broadened distal end. The pre-form shape of<br />
the plate requires that a separate plate to be used for right and left<br />
tibia.<br />
<strong>Plate</strong> thickness : 3.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.0 <strong>mm</strong><br />
Head width : 2<strong>4.5</strong> <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style Holes Length<br />
<strong>mm</strong><br />
10316011001<br />
10316011003<br />
10316011005<br />
10316011007<br />
10316011009<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
10316021001<br />
10316021003<br />
10316021005<br />
10316021007<br />
10316021009<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
D-42
Section of anatomical bone plates for<br />
operation on proximal tibia<br />
Medial Proximal Tibia <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Mediale - Proximale Tibia Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour tibia medial proximal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical medial proximal tibia bone plates are<br />
designed to be used for reducing fractures of the proximal tibia. These<br />
plates are indicated where the shape of the fracture or the soft tissue<br />
problems do not make plate attachment to the lateral tibial surface<br />
advisable.It is designed to sit on the medial aspect of the proximal<br />
tibia.The anatomical bone plate features show the following important<br />
factors to osteosynthesis as; permit a stable fixation of the small<br />
proximal and distal fragments. They consider the various physiological<br />
stability factors of distal spongiosa and meta-to diaphyseal fractures.<br />
They are curved and twisted to conform to the nature shape of the<br />
proximal and distal bones areas. They simplify reduction in case of<br />
extended fractures as their anterior surface is contoured to minimize<br />
tissue irritation.<br />
<strong>Plate</strong> details : To conform to the ventro-tibial contours of the<br />
proximal tibia, the plate is twisted and curved an has a concav surface<br />
on its bone side and broadened distal end. The pre-form shape of<br />
the plate requires that a separate plate to be used for right and left<br />
tibia.<br />
<strong>Plate</strong> thickness : 3.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.0 <strong>mm</strong><br />
Head width : 2<strong>4.5</strong> <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10317011001<br />
10317011003<br />
10317011005<br />
10317011007<br />
10317011009<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
10317021001<br />
10317021003<br />
10317021005<br />
10317021007<br />
10317021009<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
D-43
Section of anatomical bone plates for<br />
operation on distal tibia<br />
Fibular Distal <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Distal Fibulare Tibia Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour perone distal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical fibular distal tibia bone plates are designed<br />
to be used for reducing fractures of the distal tibia. These plates are<br />
indicated where the shape of the fracture or soft tissue problems do<br />
not make plate attachment to the medial tibial surface advisable. The<br />
anatomical bone plate features show the following important factors<br />
to osteosynthesis as; permit a stable fixation of the small proximal<br />
and distal fragments. They consider the various physiological stability<br />
factors of distal spongiosa and meta-to diaphyseal fractures. They<br />
are curved and twisted to conform to the nature shape of the proximal<br />
and distal bones areas. They simplify reduction in case of extended<br />
fractures as their anterior surface is contoured to minimize tissue<br />
irritation.<br />
<strong>Plate</strong> details : To conform to the ventro-tibial contours of the<br />
fibular distal tibia, the plate is twisted and curved and and has a<br />
concave surface on its bone site and broadened distal end. The preformed<br />
shape of the plate requires that a separate plate to be used<br />
for right and left tibia.<br />
<strong>Plate</strong> thickness : 3.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 17.0 <strong>mm</strong><br />
Head width : 2<strong>4.5</strong> <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10315011003<br />
10315011005<br />
10315011007<br />
10315011009<br />
Right<br />
Right<br />
Right<br />
Right<br />
7<br />
9<br />
11<br />
13<br />
122<br />
158<br />
194<br />
230<br />
10315021003<br />
10315021005<br />
10315021007<br />
10315021009<br />
Left<br />
Left<br />
Left<br />
Left<br />
7<br />
9<br />
11<br />
13<br />
122<br />
158<br />
194<br />
230<br />
D-44
Section of anatomical bone plates for<br />
operation on distal femur<br />
Distal Femur <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Distal Femur Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour femur distal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical distal femur bone plates are designed to be<br />
used for reducing fractures of the distal femur with or without<br />
involvement of the joint. The anatomical bone plate features show<br />
the following important factors to osteosynthesis as; permit a stable<br />
fixation of the small proximal and distal fragments. They consider the<br />
various physiological stability factors of distal spongiosa and metato<br />
diaphyseal fractures. They are curved and twisted to conform to<br />
the nature shape of the proximal and distal bones areas. They simplify<br />
reduction in case of extended fractures as their anterior surface is<br />
contoured to minimize tissue irritation.<br />
<strong>Plate</strong> details : The shape of distal femur bone plate is<br />
particularly well suited for acco<strong>mm</strong>odating the ventral convex curve<br />
of the normal femur, as well as its specific twisting. The plate thickness<br />
is reduced towards the distal direction in accordance with the different<br />
stability relationship of diaphysis to metaphysis. The pre-formed shape<br />
of the plate requires that a separate plate to be used for righ and left<br />
femur.<br />
<strong>Plate</strong> thickness : 5.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 25.5 <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10318011001<br />
10318011003<br />
10318011005<br />
10318011007<br />
10318011009<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
10318021001<br />
10318021003<br />
10318021005<br />
10318021007<br />
10318021009<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
D-45
Section of anatomical bone plates for<br />
operation on proximal femur<br />
Proximal Femur <strong>Plate</strong> <strong>4.5</strong> <strong>mm</strong><br />
Proximale Femur Platte <strong>4.5</strong> <strong>mm</strong><br />
<strong>Plaque</strong> pour femur proximal <strong>4.5</strong> <strong>mm</strong><br />
Indication : Anatomical proximal femur bone plates are designed<br />
to be used for reducing fractures of the proximal femur with or without<br />
involvement of the joint. The anatomical bone plate features show<br />
the following important factors to osteosynthesis as; permit a stable<br />
fixation of the small proximal and distal fragments. They consider the<br />
various physiological stability factors of distal spongiosa and metato<br />
diaphyseal fractures. They are curved and twisted to conform to<br />
the nature shape of the proximal and distal bones areas. They simplify<br />
reduction in case of extended fractures as their anterior surface is<br />
contoured to minimize tissue irritation.<br />
<strong>Plate</strong> details : The shape of proximal femur bone plate is<br />
particularly well suited for accomodating the ventral convex curve of<br />
the normal femur, as well as its specific twisting. The plate thickness<br />
is reduced towards the distal direction in accordance with the different<br />
stability relationship of diaphysis to metaphysis. The pre-formed shape<br />
of the plate requires that a separate plate to be used for righ and left<br />
femur.<br />
<strong>Plate</strong> thickness : 5.0 <strong>mm</strong><br />
<strong>Plate</strong> width : 16.0 <strong>mm</strong><br />
Head width : 25.5 <strong>mm</strong><br />
Hole spacing : 18.0 <strong>mm</strong><br />
Screws to be used : Head of plate accept 6.5 <strong>mm</strong> cancellous screws.<br />
<strong>Plate</strong> shaft accepts <strong>4.5</strong> <strong>mm</strong> cortical screws. The screw holes into<br />
distal and are placed so as to allow cancellous screw to be placed<br />
in different directions. Two small holes at the very end of the plate<br />
are for temporary fixation with kirschner wires. An oval hole in the<br />
proximal part of the plate permit fixation with an excentrically or<br />
medially placed cortical screw while allowing enough room for<br />
application of a compression device.<br />
Material : Certified Stainless Steel according to ASTM<br />
F.138 - ISO 5832/1.<br />
Ref. Number<br />
Stainless Steel<br />
Style<br />
Holes<br />
Length<br />
<strong>mm</strong><br />
10319011001<br />
10319011003<br />
10319011005<br />
10319011007<br />
10319011009<br />
Right<br />
Right<br />
Right<br />
Right<br />
Right<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
10319021001<br />
10319021003<br />
10319021005<br />
10319021007<br />
10319021009<br />
Left<br />
Left<br />
Left<br />
Left<br />
Left<br />
5<br />
7<br />
9<br />
11<br />
13<br />
86<br />
122<br />
158<br />
194<br />
230<br />
D-46
Change language