Lenze BA14.0169 Spring Operated Brake BFK ... - Southern Power
Lenze BA14.0169 Spring Operated Brake BFK ... - Southern Power
Lenze BA14.0169 Spring Operated Brake BFK ... - Southern Power
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation<br />
4.2 Assembly<br />
4.2.1 Preparation<br />
1. Unpack the spring-operated brake.<br />
2. Check that it is complete.<br />
3. Check nameplate information, especially rated voltage.<br />
4.3 Installation procedure<br />
l<br />
First install friction plate and/or flange if these extras have been supplied.<br />
4.3.1 Mounting the hub on the shaft<br />
3 Hub<br />
3.1 Circlip<br />
10 End shield/plate<br />
10<br />
3<br />
3.1<br />
K14.0502/1<br />
FIG 5<br />
Mounting the hub on the shaft<br />
1. Press the hub (3) on the shaft.<br />
2. Secure the hub against axial displacement, e.g. with a circlip (3.1).<br />
Stop!<br />
In reverse operation, we recommend additionally affixing the hub to the shaft with adhesive.<br />
4.3.2 Mounting the brake<br />
Stop!<br />
Allow for permissible wear (chapter 3.2 refers) when sizing the thread depth in the end shield (10)<br />
Check the condition of the end shield. It must be free of oil and grease.<br />
BA <strong>BFK</strong>454 GB 3.0<br />
19