MARITIME

CLEAN WATER PRODUCTS
CleanSewage Bio
CleanSewage Bio joins the portfolio of RWO,
dubbed by its creator as an attack on the wastewater
treatment market, offering one-side-access
to the system to give significant space, as well as
an easy and understandable handling concept. The
one-side-access saves and allows planning without
maintenance space at both sides and the back of
the system. Together with a very compact system
design, the space demand is up to 25% smaller than
its competitors, depending on the capacity. To ease
operation and bring failure rates to the lowest possible,
RWO
has developed
an intuitive
status
control which
enables
checking the
plant’s status
at a glance.
www.rwo.de
Headhunter
Headhunter’s team of engineers, fabricators, and
wastewater specialists work together to provide innovative
and efficient sewage treatment solutions.
Offering systems in three categories; STP, Physical
Chemical MSD, Biological MSDs, all can be
customized to fit customers’ needs. This includes
space-saving modular unit designed for the bilge
of a megayacht or a skid-mounted turnkey package
complete with lift stations for a jack up rigs,
and more.
www.headhunterinc.com
BallastMaster
GEA Westfalia Separator Group has Class Approval
from DNV GL for its ballast water management
system, BallastMaster ultraV 250. The chemicalfree
system solution for ballast water treatment fulfills
all D-2 standards of the IMO. Performing at up
to 250 cu. m./hr., its modular design is suitable for
retrofitting existing ships. The DNV-GL certified
system can be mounted as a complete “plug-andplay”
unit as well.
www.gea.com
SeaHow’s Skimmer System
New SeaHow skimmer systems can be implemented
to almost any work boat over 6m in length.
Skimmers are designed to collect both light and
heavy oils efficiently. These features provide totally
new operational efficiencies especially for near
shore and coastal oil spill response. The system
fosters efficient utilization of existing work boats
and vessels in oil spill response.
www.seahow.net
ELASTEC 1.5m BoomVane
ELASTEC’S 1.5 meter ELASTEC BoomVane is
designed to quickly deploy heavier oil booms in
coastal and open waters in advancing sweeping
and skimming applications – with only one towing
vessel. No longer limited by the length of a sweep
arm, wider boom swaths can be configured with the
unharnessed power of the BoomVane to tow the
boom into position. BoomVane also solidly holds
the swath configuration in place, maneuvered by
the boat’s captain.
www.elastec.com
The Rapid Repair Clamp
The Rapid Repair Clamp is
designed to be a fast, easy
way to temporarily repair
pipe leaks and bursts. The
self-contained design allows
for installation by one
person in less than 60 seconds,
without the use of any
tools. Made from marinegrade
stainless steel, the
Rapid Repair Clamp provides an extra tight seal
for water, steam, gas and most chemical/petroleum
liquids. Its unique design makes it ideal for
commercial applications such as marine, oil and
gas, plumbing, food processing and emergency
services. The Rapid Repair Clamp is available in
four widths and a variety of diameters, fitting pipes
ranging from 38mm – 930mm (1.5” – 36”) and can
be applied to pressurized pipes up to 20 bar.
www.worldwidemetric.com
Dometic’s SeaXchange Reverse Osmosis System
Dometic is now focused on the workboat sector with a range of products, including the Dometic’s SeaXchange
Reverse Osmosis System. Featuring a compact design that yields a surprisingly small physical footprint, as well as
high quality components that are designed for continuous high performance, the SeaXchange RO System boasts high
rejection levels with a user friendly interface. There is more than one way to purify water, but Dometic chose to use
reverse osmosis because of its cost effectiveness and ease of maintenance. The system is designed to produce the same
high-quality, purified water anywhere – in open ocean waters, in harbors or in brackish water, regardless of temperature
or level of dissolved solids in the water. Dometic’s Sea Xchange XTC and Spot Zero ZTC Series double-pass
combination systems provide operators with the flexibility in purifying feed water from not only a dockside potable
water source, but also from seawater or brackish water source. From a dockside source, with one touch, the Dometic
Spot Zero ZTC Series fresh water RO system will automatically process and purify feed water and will remove 95%-99% of the total dissolved solids before sending
the purified water to the vessel’s onboard tank. From a seawater source, Dometic’s Sea Xchange XTC Series fully-automatic seawater RO system will first process raw
seawater or brackish water, and then will send the product water from the XTC system to the Spot Zero ZTC automatic fresh water RO system for further processing to
create a true double-pass process before the ultra-purified water is sent to the vessel’s tank.
www.dometic.com
70 Maritime Reporter & Engineering News • SEPTEMBER 2015