RIB-ROOF System Details

RIB-ROOF Speed 500
65
500
63
Standard Clip Speed 500
Quality:
aluzinc t=1,30mm
stainless steel t=1,20mm
copper t=1,30mm
75 50
Clip border Speed 500
profiled or flat
(overall length 3m)
Standard-Clip and RIB-ROOF
profile sheet Speed 500 on wooden lathing
standard construction width 500mm, special widths e.g. 333 mm, 400 mm.
1. Place the first row of clips
Building inspection licence
Nr. Z-14.1–473 (steel), Nr. Z-14.1–474 (aluminium)
Non-penetrative installation on sliding clips or clip
border – no perforation of the water-carrying plane,
optimal dilatation ability for large roof surfaces
2. Insert the first profile sheet
Accessible and self-supporting – thus suitable for all
standard fields of application on purlins or full suface
support from the single-shelled rear ventilated roof to
the thermally insulated unventilated roof structure
Ultimate in easy, quick installation even at low
temperatures – no pre-assembly of the sliding clips
and no mechanical beading of the profile sheets required
3. Place the next row of clips
No transverse joints due to virtually unlimited
length – profile sheets up to 32m length are
transported by lorry (europe), longer sheets are profiled
on-site with mobile roll-forming equipment. Projects in
overseas with on-site profiling available on request.
May be used from 1.5° pitch upwards
Standard construction width 500 mm
other overall widths on request
2. Insert the next profile sheet
Conical and conical curved profile sheets
Curved profile sheets from a radius of 2m on –
smaller radii on request
3
Zambelli RIB-ROOF – System Details
Full range of accessories, wide range of materials
and colours
Profile sheets available with prefabricated eaves side
beading or ridge side bending of the bottom chord