RIB-ROOF System Details

Roof Construction
The Variety of Shapes
Curved, conical and conical curved Conical profile sheet RIB-ROOF Speed 500
We also deliver RIB-ROOF profile sheets in curved (convex
or concave), conical, and conical-curved design.
Arches with large radii can be executed with straight
profile sheets, profile sheets for smaller radii are
pre-fabricated or roll formed with mobile plants on site.
RIB-ROOF 465 in extremely small radii requires a
round bent execution of the profile sheets.
Curved RIB-ROOF Speed 500 profile sheets with small
radii are fixed with turned clips. For conical designs,
RIB-ROOF Speed 500 profile sheets can be used in
different construction widths.
Curved profile sheet RIB-ROOF Speed 500, turned clip
See also our Practical Guide for Planning and Installing
chapter „Conical/curved/conical curved profile sheets“.
Curved roof – roof construction with wooden lateral and counter lathing
Possible for r>8,0m when wooden lateral
and counter lathing is used
RIB-ROOF curved
Thermal insulation with intervening
lateral and counter lathing
Vapour barrier
Trapezoidal sheet metal
Truss
Radii from r>4m on are possible when wooden
lateral lathing or a metallic Z-profile or a
domed profile is used. Smaller radii on request.
Zambelli RIB-ROOF – System Details
6