Cirrus Aircraft Update Webinar
SR22T - Cirrus Design Authorized Service Center Home
SR22T - Cirrus Design Authorized Service Center Home
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Care and Inspection<br />
Fuel Injection Nozzles<br />
• When removing or<br />
installing fuel injectors, use<br />
Burroughs #8165 or similar<br />
tool<br />
– This tool allows for the removal of<br />
the injector without removing<br />
induction tubes<br />
FUEL INLET<br />
NOZZLE<br />
COMPRESSOR<br />
DISCHARGE<br />
AIR PASSAGE<br />
SHROUD<br />
NOZZLE<br />
IDENTIFICATION<br />
NUMBER STAMPED<br />
ON<br />
HEX FLAT<br />
JET<br />
O‐RING<br />
AIR INLET<br />
O‐RING<br />
• Avoid any side load on the nozzle<br />
to prevent damage to the threads<br />
or cracking of the nozzle body<br />
• Clean nozzles by soaking in<br />
acetone, methyl ethyl ketone or<br />
lacquer thinner for a few hours and<br />
gently dry with compressed air