deniway® plate chain conveyor - Denipro

More documents

Recommendations

Info

Auxiliary equipment (examples) Auxiliary equipment On request, we can provide all the necessary auxiliary equipment to make your conveyor complete. – In-feed conveyor belts with extended arm – Timing belts 45° with extended arm – Pushers – Dischargers – Extended arms for return drives and return sections – Belt conveyors – Live roller conveyors The usage of auxiliary equipment depends on the type and size of the goods conveyed. 28 Appendix Pusher Discharger Extended arm Live roller conveyor
Project engineering information The deniway ® construction kit has been designed to implement a complete conveyor with the standard parts. The conveyors can be adjusted to handle many different requirements. A few basic principles for concept development and assembly – Straight lines should be divided up into as many threemetre sections as possible. – Divide curves up into as large segments as possible. Largest segment = 90°. – A straight channel, at least L ≥ 300 mm, should always be placed between changes of direction or transitions from side curves to positive or negative curves. – Channel supports in straight sections every 2 to 2.5 m, in side curves every 1.5 to 2 m (curve dimensions). The supports should be distributed evenly throughout the conveyor. – When using our standard supports, the table height is 850 mm. The supports can be adjusted in a ± 100 mm range. – The conveyor should include sideways guiders in sections that are over head height. 29 Project engineering information Please note In exceptional cases, some conveyors might require different procedures and equipment that vary from those outlined above. At the project planning and assembly stage of the conveyors, the appropriate statutory regulations and health and safety regulations must be abided by.
Page 1: Conveying with ease deniway ® plat
Page 4 and 5: The deniway ® construction kit Str
Page 6 and 7: Goods Unit goods such as boxes, lam
Page 8 and 9: Channels Overview of channel types
Page 10 and 11: Single twisted channel Basic versio
Page 12 and 13: Single spiral side curve Basic vers
Page 14 and 15: Single spiral negative curve Basic
Page 16 and 17: Single spiral positive curve Basic
Page 18 and 19: Plate chain Plate chain The plate c
Page 20 and 21: Return unit The return unit is opti
Page 22 and 23: Linear drive Linear drive is used i
Page 24 and 25: Supports Supports Narrow for circul
Page 26 and 27: Fitting screws (sets) For connectin
Page 30 and 31: You can order any conveyor easily f
Page 32: Denipro AG, Weinfelden/TG, Switzerl

deniway® plate chain conveyor - Denipro

Create successful ePaper yourself

Delete template?

Save as template?